Huawei MediaPad 10 Link+

Home/ Huawei/ Phones/ MediaPad 10 Link+

Table of Contents

Summary

Huawei MediaPad 10 Link+ Price

At the time of it's release in 2014, May, the manufacturer's retail price for a new Huawei MediaPad 10 Link+ was about 350 EUR.

The retail price of a new or used/second hand Huawei MediaPad 10 Link+ varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of Huawei MediaPad 10 Link+ across different regions, markets and countries.

Frequently Asked Questions(FAQs)

What is the battery capacity of Huawei MediaPad 10 Link+?

6600 mAh

What is the display size of Huawei MediaPad 10 Link+?

10.1 inches

How to reset or factory restore Huawei MediaPad 10 Link+ device?

There are a few methods to reset or factory restore a Huawei MediaPad 10 Link+ device. Here are the most common and recommended ways: Method 1: Using Recovery Mode 1. Turn off the device. 2. Press and hold the power button and the volume up button until the recovery menu appears. 3. Use the volume buttons to navigate to "Wipe data/factory reset" and then press the power button to select it. 4. You will be prompted to confirm the action. Select "Yes" using the volume buttons. 5. The device will now begin the factory reset process, which may take several minutes. Method 2: Using Recovery Menu 1. Turn off the device. 2. Press and hold the power button and the volume up button until the recovery menu appears. 3. Use the volume buttons to navigate to "Wipe data/factory reset" and then press the power button to select it. 4. You will be prompted to confirm the action. Select "Yes" using the volume buttons. 5. The device will now begin the factory reset process, which may take several minutes. Method 3: Using PC 1. Connect the device to your computer using a USB cable. 2. Download and install the Huawei MediaPad 10 Link+ USB driver on your computer. 3. Open a command prompt on your computer and navigate to the folder where the USB driver is installed. 4. Type the following command and press enter: "Huawei_Firmware_Flash_Package.exe /batchupdate" 5. Wait for the device to reboot. 6. When the device boots up, it will be in recovery mode. Follow the same steps as in Method 1 to perform a factory reset. Note: These methods may erase all data on the device, so be sure to back up any important information before attempting a factory reset.

What is the internal storage of Huawei MediaPad 10 Link+?

16 GB

Specifications

Network

Technology: GSM / HSPA / LTE
2G bands: GSM 850 / 900 / 1800 / 1900
3G bands: HSDPA
4G bands: LTE (unspecified)
Speed: HSPA 42.2/5.76 Mbps, LTE Cat4 150/50 Mbps
GPRS: Yes
EDGE: Yes