How to reset or factory restore Huawei Enjoy 10e device?
The Huawei Enjoy 10e is a popular smartphone known for its features and ease of use. If you are having problems with your device and want to reset or factory restore it, there are a few different methods you can try. In this article, we'll discuss the most common and recommended ways to reset or factory restore a Huawei Enjoy 10e device.
1. Using the Software Recovery (VTS) Mode:
a. Turn off your device by pressing and holding the power button.
b. Press and hold the Volume Up and Power buttons together.
c. Release the Power button, but continue holding the Volume Up button.
d. Wait for the VTS (Vendor Testing Software) menu to appear.
e. Use the Volume Down button to scroll to "Wipe Data/Factory Reset" and then press and hold the Power button.
f. Wait for the device to restart and you'll see the welcome screen again.
2. Using the Bootloader:
a. Turn off your device by pressing and holding the power button.
b. Press and hold the Volume Up and Power buttons together.
c. Connect your device to your computer with a USB cable.
d. Open a command prompt by typing "cmd" in the Start menu and pressing enter.
e. Type for AVD Manager and press enter.
f. Connect device andVerify Volumes.
g. Click on Yes - Erase everything user data.
3. Using the Replacement Parts:
This method is recommended for repair shops and factory reset, This method is recommended for hardware components replacement:
a. Turn off your device by pressing and holding the power button.
b. Turn on the volume-down button as well as the power button together.
c. Wait for the phone to boot into stock recovery.
d. Select "Backup and Settings".
e. Select "Restore Backup".
f. Select "From Local Backup".
g. Select the backup file that you want to restore on your device.
h. Select "Restore Now".
4. Using the High voltagfe test tool:
a. This advanced method is only recommended for experienced technicians like Software engineers and hackers.
b. Connect the device through USB cable to the PC.
c. Open the command prompt and Navigate to the folder where USB address is present.
d. Run the 'FLASH_ALL ' command and wait for the phone to reset.
e. The software will overwrite all data on the device.
It's important to note that resetting or factory restoring your device will erase all data, so make sure to back up any important information before attempting to reset your device. Additionally, factory resets should be used as a last resort option and only when all other methods have failed.
