How to reset or factory restore HTC Rider device?
To reset or factory restore a HTC Rider device, you can follow these steps:
Method 1: Using the Recovery Bootloader
1. Turn off your device and unplug it from the charger.
2. Press and hold the Volume Up button and the Power button simultaneously until the HTC logo appears on the screen.
3. Release the Volume Up button and press and hold the Power button until the recovery screen appears.
4. Select "Wipe Data/Factory Reset" and confirm by selecting "Yes".
5. Wait for the device to reset (this may take several minutes).
6. Once the device has restarted, follow the on-screen setup process to set up your device.
Method 2: Using a Computer and a USB Cable
1. Install the HTC Sync Manager installation file on your computer.
2. Connect your device to the computer using a USB cable.
3. Open a command prompt on your computer and navigate to the folder where the "htcutils.com" file is located.
4. Type the following command to put your device into bootloader mode: "htcusb debug hlaunch"
5. Type the following command to enter recovery mode: "stkboot @"
6. Unplug the device from the computer and disconnect the USB cable.
7. Press and hold the Volume Up button and the Power button simultaneously until the HTC logo appears on the screen.
8. Release the Volume Up button and press and hold the Power button until the recovery screen appears.
9. Select "Wipe Data/Factory Reset" and confirm by selecting "Yes".
10. Wait for the device to reset (this may take several minutes).
11. Once the device has restarted, follow the on-screen setup process to set up your device.
Note: Resetting your device to factory settings will erase all your data, apps, and settings. If you have important data or applications on your device, make sure to back them up before resetting. It is also important to use the recommended method to avoid damaging your device's hardware.
