How to reset or factory restore HTC 7 Pro device?
When it comes to resetting or factory restoring a HTC 7 Pro device, there are a few common and recommended methods available One of the most popular method is using the hard reset process, which erases all data on the device and returns it to its default factory settings. However, it is important to note that this process should be used with caution and only when all other options have failed, as it will permanently delete all data on the device.
To perform a hard reset on a HTC 7 Pro, follow these steps:
1. Turn off the device.
2. Press and hold the power button down, then press and hold the home button at the same time.
3. Release the home button, but continue to hold the power button.
4. Wait for the device to turn on and the LCD screen to display a warning message.
5. Press and hold the power button until you see a different warning message on the screen.
6. Press and hold the power button again until the device turns off.
7. Turn on the device and wait for the setup screen to appear. Follow the on-screen instructions to set up the device as if it were new.
Another method recommended by HTC is using the HTC Sync software, which comes pre-installed on most HTC devices, such as the 7 Pro. This software allows you to back up and restore the device's data to your computer, to ensure that you don't lose any important information during the reset process.
To use the HTC Sync software to reset your 7 Pro, follow these steps:
1. Connect your device to your computer using a USB cable.
2. Open HTC Sync on your computer.
3. Select "Backup my device" and make sure it is set to backup all data on your device.
4. Click "Backup Now".
5. Once the backup is complete, disconnect your device from the computer and turn it off.
6. Press and hold the power button down, then press and hold the volume down button at the same time.
7. Release both buttons, then press and hold the power button again.
8. Wait for the device to turn on and the LCD screen to display a warning message.
9. Press and hold the power button until you see a different warning message on the screen.
10. Press and hold the power button again until the device turns off.
11. Turn on the device and wait for it to restore the data from the backup.
It is important to note that it is always a good idea to double check the instructions before attempting to reset or factory restore any device. Additionally, it is always recommended to back up your data before performing a reset, so that you can restore it after the reset process is complete.
