How to reset or factory restore HP 8 device?
HP 8 devices are a range of computer screen sizes, from 8 to 24 inches, used in a variety of hardware configurations. Resetting or factory restoring an HP 8 device is typically done to restore the device to its original functionality or to troubleshoot problems with the device. Here are the most common and recommended ways to reset or factory restore an HP 8 device:
1. Using the HP Drive Recovery Image utility:
1. Connect the HP 8 device to your computer using a USB cable or USB-C cable.
2. Open Device Manager and locate the HP 8 device.
3. Right-click on the device and select "Properties".
4. In the "Properties" window, select "Driver".
5. Select "Driver Version".
6. Click on the "Recovery Image" tab.
7. Select "Browse".
8. Locate the recovery image provided by HP and click on it to select.
9. Click on "Restore".
10. Follow the prompts to complete the restore process.
2. Using the built-in reset feature:
1. Press and hold the power button on the HP 8 device for ten seconds.
2. Connect a USB drive to the computer and your HP 8 device. This will allow you to create a new image to restore to the device.
3. Open the Command Prompt on your computer.
4. Navigate to the drive where the image resides and run the following command to create a new recovery image:
`fdisk /create-image c: /recimg /volume-label `
5. Once the image is created, reboot the HP 8 device with the USB drive plugged in.
6. Press and hold the F5 key immediately after the power turns on. This will enter the boot menu.
7. Select "Recovery environment" and press enter.
8. Select "Advanced recovery" using the arrow keys on the keyboard.
9. Select "Recovery media from a USB device" using the arrow keys.
10. Insert the USB drive containing the recovery image, press the "Rec" key to select it, and press Enter.
11. Select "Wait for an available recovery image" and press enter.
12. After a few minutes, the HP 8 device will reboot to a fresh copy of Windows.
3. Using the Windows Recovery Image Creator Tool (WinREICT):
WinREICT is a free, third-party Recovery Image Creator.
4. Download and install WinREICT from the official website: [link]
5. Connect the HP 8 device to your computer using a USB cable or USB-C cable.
6. Open WinREICT and select "Windows recovery image" from the dropdown menu.
7. Follow the prompts to create a recovery image for the HP 8 device.
8. Once the image is created, insert it into the HP 8 device and press the volume down button until the boot menu appears.
9. Select "Recovery environment" and press enter.
10. Select "Advanced recovery" using the arrow keys on the keyboard.
11. Select "Recovery media from a USB device" using the arrow keys.
12. Select the recovery image and press Enter.
13. After a few minutes, the HP 8 device will reboot to a fresh copy of Windows.
Note: It is important to back up any important data before resetting or factory restoring an HP 8 device, as all files and settings will be lost in the process.
