How to reset or factory restore Haier N90 device?
To reset or factory restore a Haier N90 device, follow the steps provided below:
1. Turn off the device: Press and hold the Power button for about 10 seconds until the power turns off.
2. Press and hold the Red button: With the device turned off, press and hold the Red button located on the top of the device for about 15 seconds. This will access the device bootloader.
3. Connect to a computer: Connect the device to a computer using a USB cable. Make sure that you have the necessary drivers installed on your computer.
4. Back up the device: Before proceeding with the reset, it's essential to back up your data to an external drive or cloud storage service to prevent data loss.
5. Start up the computer and the USB drive: When connected, turn on the computer and the USB drive. The device should appear in File Explorer.
6. Open the device file system: Right-click on the device icon in File Explorer and select "Properties." Then, select "Tools" and click on "By clicking 'OK' below, you acknowledge that" and then follow the instructions.
7. Run the recovery program: Once you've done that, open the recovery program that came with your device.
8. Factory reset the device: Follow the instructions on the screen to complete the factory reset process.
9. Wait for the device to restart: This process may take a few minutes, and you should download and watch the Haier logo on the screen. Wait for the device to restart automatically.
10. Enjoy your device: Once your device restarts, you should see the Haier logo on the screen, and your device will be reset to its factory settings.
Note: This process will erase all data on your device, so make sure to back up all your important information before proceeding with the factory reset.
