How to reset or factory restore Haier M180 device?
The Haier M180 is a smart air purifier that is designed to help freshen up the air in your home. However, in some cases, you may need to reset or factory restore your device. In this guide, we will walk you through the most common and recommended ways to reset or factory restore a Haier M180 device.
**Method 1: Reset the Wi-Fi connection on the Haier M180 device**
This method is useful if you want to reset the Wi-Fi connection on the Haier M180. Here's how to do it:
1. Press and hold the power button on the Haier M180 device until the LED light starts flashing rapidly.
2. Release the power button.
3. Wait until the LED light turns green.
4. While the LED light is green, press and hold the power button again.
5. Keep holding the power button until the LED light turns blue.
6. Release the power button.
7. Wait for the LED light to turn blue.
8. Press and hold the power button again, then release the button when the LED light turns green.
9. Wait for the LED light to turn green again.
10. Press and hold the power button until the LED light turns blue.
11. Release the power button.
12. While the power button is held, press and hold the Wi-Fi button on the back of the device.
13. Wait until the LED light turns green.
14. When the LED light turns green, press and hold the Wi-Fi button for another 3 seconds.
15. Release both buttons.
After completing these steps, your Haier M180 device will reset and connect to the Wi-Fi network.
**Method 2: Restore the default factory settings on the Haier M180 device**
This method is useful if you want to restore the default factory settings on the Haier M180. Here's how to do it:
1. Press and hold the power button on the Haier M180 device until the LED light starts flashing rapidly.
2. Release the power button.
3. Wait until the LED light turns green.
4. While the LED light is green, press and hold the power button again.
5. Keep holding the power button until the LED light turns blue.
6. Release the power button.
7. While the power button is held, press and hold the Wi-Fi button on the back of the device.
8. Wait until the LED light turns green.
9. When the LED light turns green, press and hold the Wi-Fi button for another 3 seconds.
10. Release both buttons.
11. While the power button is held, press and hold the factory reset button (located at the bottom of the device).
12. Wait until the LED light turns blue.
13. Release the factory reset button.
14. While the power button and factory reset button are held, wait for the LED light to turn green.
15. When the LED light turns green, release both the power button and factory reset button.
After completing these steps, your Haier M180 device will reset and restore to its default factory settings.
**Method 3: Reset the device password on the Haier M180 device**
This method is useful if you have forgotten the password on the Haier M180 device. Here's how to do it:
1. Press and hold the power button on the Haier M180 device until the LED light starts flashing rapidly.
2. Release the power button.
3. Wait until the LED light turns green.
4. While the LED light is green, press and hold the power button again.
5. Keep holding the power button until the LED light turns blue.
6. Release the power button.
7. While the power button is held, press and hold the Wi-Fi button on the back of the device.
8. Wait until the LED light turns green.
9. When the LED light turns green, press and hold the Wi-Fi button for another 3 seconds.
10. Release both buttons.
11. While the power button is held, press and hold the reset password
