Gionee Elife E3

Home/ Gionee/ Phones/ Elife E3

Table of Contents

Summary

Gionee Elife E3 Price

At the time of it's release in 2013, the manufacturer's retail price for a new Gionee Elife E3 was about 180 EUR. Click here to discover the current price of Gionee Elife E3 in 🇺🇸 US.

The retail price of a new or used/second hand Gionee Elife E3 varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of Gionee Elife E3 across different regions, markets and countries.

Frequently Asked Questions(FAQs)

What is the battery capacity of Gionee Elife E3?

The Gionee Elife E3 has a battery capacity of 2000mAh

What is the display size of Gionee Elife E3?

The Gionee Elife E3 has a display size of 4.7 inches

What is the internal storage of Gionee Elife E3?

The Gionee Elife E3 has an internal storage of 16GB

How to reset or factory restore Gionee Elife E3 device?

The Gionee Elife E3 is an Android smartphone that can be reset or factory restored to restore the device to its original state. Below is the most common and recommended ways to reset or factory restore a Gionee Elife E3 device. Method 1: Using the hardware keys - Turn off the device by pressing and holding the power button. - Press and hold the power button and the volume up button simultaneously until the Gionee logo appears. - Select recovery mode by using the volume down button and press the power button to confirm. - When in recovery mode, select wipe data/factory reset option and use the volume keys to confirm. - The device will now boot up to the home screen with all your settings restored to their default state. Method 2: Using the settings menu - menu with three dots, select “About phone” > “Vendor information” > “Update Electronic Service Salt”. - Once the salt code is displayed, turn off the device by pressing and holding the power button and waiting for the device to shut down. - Re-start the device in recovery mode by pressing and holding the power button and volume down button simultaneously until the Gionee logo appears. - Wait for the device to boot up to the recovery mode menu. - Select “Wipe data/factory reset” and use the volume keys to confirm. - The device will now boot up to the home screen with all your settings restored to their default state. Method 3: Using the need recovery software - Download the Gionee Elife E3 version of the need recovery software from a trusted source and save it to your computer. - Connect the device to your computer using the USB cable provided with the phone and make sure the detection icon appears on your computer screen. - Run the need recovery software on your computer while keeping the device’s USB cable connected. - Click on “Install” and select the firmware file you saved earlier. - Once the installation is complete, the device will reboot automatically and should restore to factory settings. Method 4: Using the PC - Connect the device to your computer using the USB cable provided with the phone and should automatically create a USB drive from the device. - We recommend using a fresh PC that does not contain any malware on it because this could potentially reach your device and compromise it. - Open the prepared USB drive on your computer. - Select the Android firmware file and click on the “flash firmware” button. - The device will automatically enter recovery mode and then be restored to factory settings. In summary, to reset or factory restore a Gionee Elife E3 device, follow the above methods recommended by Gionee.