How to reset or factory restore Gigabyte GSmart MW998 device?
The Gigabyte GSmart MW998 is a smartwatch that runs on the Android operating system. In order to reset or factory restore this device, you can follow these recommended methods:
1. Hard Reset:
A hard reset or factory data reset resets your smartwatch to its factory settings, erasing all data, including personalization, settings, and installed apps.
Before Resetting:
1. Ensure that your smartwatch is fully charged.
2. Make sure that you backup all important data.
Steps:
1. Turn off the smartwatch.
2. Press and hold the Volumes Down and Power buttons simultaneously for 10-15 seconds until the recovery menu appears.
3. Select and then press the Volumes Down button to choose "Wipe data/factory reset."
4. Press the Power button to confirm your choice.
5. Wait for the smartwatch to reset. This process may take a few minutes.
6. Once the reset is complete, turn off the smartwatch and then turn it back on.
2. Reset to default settings:
This method will reset the smartwatch to its default settings, but it will not erase any data.
Before Resetting:
1. Ensure that your smartwatch is fully charged.
Steps:
1. Turn off the smartwatch.
2. Press and hold the Volumes Down and Power buttons simultaneously for 10-15 seconds until the recovery menu appears.
3. Select "Wipe All User Data" and then press the Power button to confirm your choice.
4. Wait for the smartwatch to reset. This process may take a few minutes.
5. Once the reset is complete, turn off the smartwatch and then turn it back on.
3. Reset through USB debugging:
This method requires a computer with the USB debugging feature enabled and the GSmart MW998 smartwatch connected to the computer. It is a more technical reset process that requires some knowledge of programming.
Before Resetting:
1. Ensure that your smartwatch is fully charged.
2. Install the latest version of the Android Smartwatch Connector on your computer.
3. Connect the smartwatch to the computer using the USB cable.
4. Open the Android Smartwatch Connector
5. Selection "Reset to Default Settings".
6. Wait for the smartwatch to reset. This process may take a few minutes.
7. Once the reset is complete, unplug the USB cable from the computer and then turn off the smartwatch.
8. Turn on the smartwatch.
It is important to note that each of these methods will erase all data on your smartwatch, so make sure you have properly backed up your data before attempting to reset your device.
