How to reset or factory restore Gigabyte GSmart i (128) device?
To reset or factory restore a Gigabyte GSmart i (128) device, you can follow these steps:
Method 1: Using Hard Reset
Before performing a hard reset on your Gigabyte GSmart i (128), make sure to back up all of your important data, as this method will erase all traces of your device, including personal files and settings.
Step 1: Turn off your device by holding down the power button until the device shuts down.
Step 2: Once the device is shut down, press and hold the volume down and power buttons together, and continue holding the two buttons until the device enters the boot menu.
Step 3: In the boot menu, select "Recovery Mode" using the volume buttons to navigate and the power button to confirm.
Step 4: Once you're in recovery mode, select "Wipe data/factory data" and confirm by pressing the power button.
Step 5: Wait for the device to wipe all of its internal data and restart. The device will prompt you to set up your device as new.
Method 2: Using OEM Data Flashing Tool
If you have the OEM Data Flashing Tool software for your Gigabyte GSmart i (128) device, you can use it to reset or factory restore the device. Make sure you have the correct version of the software for your device.
Step 1: Download the OEM Data Flashing Tool software from the internet and install it on your computer.
Step 2: Connect your Gigabyte GSmart i (128) device to your computer using a USB cable.
Step 3: Open the OEM Data Flashing Tool software and select your device from the list of available devices.
Step 4: Choose "Factory Data Flashing" from the menu and follow the on-screen instructions.
Step 5: After the flashing process is done, disconnect the device from the computer and wait for it to restart. Once it's fully booted, you can set it up as a new device.
Method 3: Using Android Recovery
To use Android Recovery to reset or factory reset your Gigabyte GSmart i (128) device, you'll need to have Android Recovery on your device. You can download it from the internet and then transfer it to your device's internal storage or SD card using a USB cable.
Step 1: Turn off your device and press and hold the power button and volume up buttons together until you enter fast boot mode.
Step 2: Once you're in fast boot mode, select "Recovery Mode" using the volume buttons and the power button to confirm.
Step 3: In recovery mode, you'll see an Android Recovery menu. Select "Wipe data/factory data" using the volume buttons and confirm by pressing the power button.
Step 4: Your device will now be reset to its factory settings and you can set it up as a new device.
Note that this method requires root access to your device, so make sure you have root installed before performing a factory reset using Android Recovery.
