Eten M500

Home/ Eten/ Phones/ M500

Table of Contents

Summary

Eten M500 Price

The retail price of a new or used/second hand Eten M500 varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of Eten M500 across different regions, markets and countries.

Frequently Asked Questions(FAQs)

What is the battery life of the Eten M500?

The Eten M500 has a battery life of up to 5 hours.

What type of processor does the Eten M500 have?

The Eten M500 has an Intel XScale PXA270 processor.

How to reset or factory restore Eten M500 device?

The Eten M500 is an older device that may no longer be supported by the manufacturer. If you need to reset or factory restore your Eten M500, there are several methods you can try. However, it is important to note that resetting your device will erase all data and settings, so be sure to back up any important information before attempting a reset. Here are the most common and recommended ways to reset or factory restore an Eten M500: 1. Using the Power Button: Press and hold the power button for 10 seconds. This will turn on the device's recovery mode. 2. Using the Reset Menu: Access the reset menu by pressing and holding the power button and volume up button together for 10 seconds. From here, select "Wipe data/factory reset" and confirm your selection. 3. Using the Recovery Mode: If your device is running Android 4.0 or later, you can use the recovery mode to reset your device. To access the recovery mode, press and hold the power button and volume down button together for 10 seconds. From here, select "Wipe data/factory reset" and confirm your selection. 4. Using a Computer: You can also use a computer to reset your Eten M500. Connect your device to your computer using a USB cable and then use a recovery tool such as DroidAssistant or SAM Mobile Security to reset your device. Be sure to follow the instructions carefully and back up any important data before attempting a factory reset. 5. Using the Service Description File: If all other methods fail, you can try using the service description file (SDF) to reset your Eten M500. This file is a copy of the device's original firmware that can restore the device to its factory state. To use the SDF, put it on a USB stick and insert the stick into your device. From there, access the recovery mode and select "Install zip from SD card" to load the SDF. It is important to note that attempting a reset or factory restore can be a risky process, and it is not guaranteed to work. Before attempting a reset or factory restore, be sure to back up any important data and understand the potential risks involved. Additionally, some of these methods may void the device's warranty, so use them at your own risk.

What operating system does the Eten M500 use?

The Eten M500 runs on Windows Mobile 6.0 Professional.

Specifications

Network

Technology: GSM
2G bands: GSM 850 / 900 / 1800 / 1900
GPRS: Class 10
EDGE: No

Launch

Announced: 2004, Q4
Status: Discontinued

Body

Dimensions: 111.7 x 60.7 x 22 mm (4.40 x 2.39 x 0.87 in)
Weight: 170 g (6.00 oz)
SIM: Mini-SIM

Display

Type: TFT resistive touchscreen, 65K colors
Size: 2.8 inches, 42 x 57 mm, 24.3 cm2 (~35.8% screen-to-body ratio)
Resolution: 240 x 320 pixels, 4:3 ratio (~143 ppi density)
: Handwriting recognition