Eten glofiish X900

Home/ Eten/ Phones/ glofiish X900

Table of Contents

Summary

Eten glofiish X900 Price

At the time of it's release in 2008, the manufacturer's retail price for a new Eten glofiish X900 was about 350 EUR.

The retail price of a new or used/second hand Eten glofiish X900 varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of Eten glofiish X900 across different regions, markets and countries.

Frequently Asked Questions(FAQs)

What is the battery life of Eten glofiish X900?

The battery life of Eten glofiish X900 is up to 8 hours.

How much RAM does Eten glofiish X900 have?

Eten glofiish X900 has 128MB of RAM.

How to reset or factory restore Eten glofiish X900 device?

To reset or factory restore an Eten Glofiish X900 device, there are a few different methods you can use depending on the situation. Here are the most common and recommended ways to reset them: Method 1: Using a computer 1. Connect your Glofiish X900 device to your computer using a USB cable. 2. Install and launch the Eten Driver Software Suite on your computer. 3. Click on the "Tools" tab and then click on "Flash Firmware" see note 1. 4. Select "Eten Glofiish" as the device type and then select "Eten Glofiish X900" as the device model. 5. Select the firmware file you downloaded from the Eten website (see note 2). 6. Click on "DownLoad" to download the firmware to your computer. 7. Click on "Burn" to burn the firmware to your device. 8. Then click on "Flash" to start the flashing process. This could take several minutes. 9. Once the flashing process is complete, your device will be reset and you can set it up as a new device. Note 1: The tool to flash firmware on your device is located in the Eten driver software suite. Note 2: You can download the latest firmware from the Eten website by visiting the product page for the Glofiish X900 and clicking on the "Support" tab. From there, you can download the latest firmware file for your device. Method 2: Using a bootloader This method is a bit more advanced and requires a bit more technical know-how. 1. Download the bootloader file from the Eten website (see note 3). 2. Connect your Glofiish X900 device to your computer using a USB cable. 3. Select "ComPort" in the "Computer" menu and select the correct port. 4. Select "Tools" in the main menu and select "Open Bootloader". 5. Select "Yes" to confirm that you want to open the bootloader. 6. Once the bootloader is open, select "Restore" and then select the firmware file you downloaded. 7. The flashing process will start, this could take several minutes. 8. Once the flashing process is complete, your device will be reset and you can set it up as a new device. Note 3: You can download the bootloader file from the Eten website by visiting the product page for the Glofiish X900 and clicking on the "Support" tab. From there, you can download the bootloader file. It's important to note that resetting or factory restoring your device will erase all data and settings, so make sure to back up any important data before resetting your device. Additionally, it is recommended to reset your device only if all other options have failed, as it can be a bit of a technical process.

What is the display size of Eten glofiish X900?

The display size of Eten glofiish X900 is 2.8 inches.

Specifications

Network

Technology: GSM / HSPA
2G bands: GSM 850 / 900 / 1800 / 1900
3G bands: HSDPA 850 / 1900 / 2100
Speed: HSPA 3.6/0.384 Mbps

Launch

Announced: 2008, June. Released 2008
Status: Discontinued

Body

Dimensions: 106 x 60.5 x 17 mm (4.17 x 2.38 x 0.67 in)
Weight: 147 g (5.19 oz)
SIM: Mini-SIM

Display

Type: TFT resistive touchscreen, 65K colors
Size: 2.8 inches, 24.3 cm2 (~37.9% screen-to-body ratio)
Resolution: 480 x 640 pixels, 4:3 ratio (~286 ppi density)
: Handwriting recognition