How to reset or factory restore Eten glofiish M800 device?
Eten Glofiish M800 is a smartphone which can be reset to its factory settings in case of any issues or crashes. Here are the common and recommended ways to reset or factory restore a Eten Glofiish M800 device:
Method 1: Using the Volume and Power buttons
1. Turn off the Eten Glofiish M800 device.
2. Press and hold the Volume up button and the Power button at the same time.
3. Release the Volume up button, but continue holding the Power button.
4. The phone will go into recovery mode. In recovery mode, you will see the Eten Glofiish logo and "Recovery Menu."
5. Select "Wipe data/factory reset" and wait for the process to complete.
6. Reboot the device by selecting "Reboot system now."
Method 2: Using USB Debugging
1. Connect your Eten Glofiish M800 device to your computer using a USB cable.
2. Launch a USB debugging tool on your computer. One such tool is Android Debug Bridge (ADB), which is available for Windows, Mac, and Linux.
3. Enable USB debugging on your Eten Glofiish M800 device by going to Settings > Developer options and turning on USB debugging.
4. Open a command prompt on your computer and navigate to the directory where ADB is installed.
5. Write "adb devices" to check if your device is recognized by ADB.
6. Write "adb reboot recovery" to reboot the device into recovery mode.
7. In recovery mode, select "Wipe data/factory reset" and wait for the process to complete.
8. Reboot the device by selecting "Reboot system now."
Method 3: Using Samsung Smart Switch
Samsung Smart Switch is a tool that allows you to transfer data between Samsung devices and other Android phones, including Eten Glofiish M800. Smart Switch can also be used to reset your Eten Glofiish M800 device to its factory settings. Here's how:
1. Install Samsung Smart Switch on your computer. You can download it from Samsung's official website.
2. Connect your Eten Glofiish M800 device to your computer using a USB cable.
3. Open Samsung Smart Switch on your computer and select "Backup/Restore."
4. On your Eten Glofiish M800 device, go to Settings > Backup & Restore.
5. Tap "Factory data reset" to begin the process.
6. Follow the prompts and wait for the device to restart. Reboot the device and you should be prompted to set up the device as if it were new.
