Doogee CS1

Home/ Doogee/ Phones/ CS1
Doogee CS1 image - Nikonet125.com
An image of the Doogee CS1.
Table of Contents


The Doogee CS1 is a rugged smartphone with a 5.5-inch HD+ display, a dual rear camera setup, and a 5,000 mAh battery. It runs on the Android 10 operating system and is powered by a MediaTek Helio P60 processor.

Doogee CS1 Price

At the time of it's release in 2021, February, the manufacturer's retail price for a new Doogee CS1 was about 30 EUR.

The retail price of a new or used/second hand Doogee CS1 varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of Doogee CS1 across different regions, markets and countries.

Frequently Asked Questions(FAQs)

What is the battery capacity of the Doogee CS1?

The Doogee CS1 has a battery capacity of 5000mAh.

What is the display size of the Doogee CS1?

The Doogee CS1 has a display size of 6.3 inches.

How to reset or factory restore Doogee CS1 device?

The Doogee CS1 is a budget-friendly smartphone that runs on the Android operating system. This device, like any other, may encounter software issues or glitches, and a factory reset may be necessary to fix these problems. In this guide, we'll show you three recommended methods for resetting or factory restoring a Doogee CS1 device: Method 1: Reset using the device's settings 1. Turn off the Doogee CS1 device. 2. Press and hold the volume up button and the power button at the same time. 3. Release the two buttons after the Doogee logo appears on the screen. 4. Use the volume buttons to navigate to "Wipe data/factory reset" and then press the power button to select it. 5. Select "Yes" to confirm the factory reset. 6. Wait for the device to reset and reboot. Method 2: Reset using ADB (Android Debug Bridge) 1. Connect your Doogee CS1 device to your computer using a USB cable. 2. Enable USB debugging on your device by going to the "Settings" app, then "About phone," and then "Build number." Tap on "Build number" seven times until the "You are now a developer!" message appears. 3. Go back to the "Settings" app and turn on "Developer options." 4. Enable "OEM unlocking," then connect your device to your computer again. 5. Open a command prompt window on your computer, then navigate to the folder where ADB is installed. 6. Type "adb devices" to ensure that ADB can detect your device. 7. Type "adb reboot recovery" to reboot your device into recovery mode. 8. Once your device is in recovery mode, select "Wipe data/factory reset" and then confirm the reset. 9. Wait for the device to reset and reboot. Method 3: Reset using a recovery app 1. Download and install a recovery app on your Doogee CS1 device from a trusted source. 2. Open the recovery app and select "Factory reset." 3. Select "Yes" to confirm the factory reset. 4. Wait for the device to reset and reboot. Note: It's always important to back up your important data before resetting your device, as all data will be lost during the reset process. Also, be aware that resetting your device will erase all settings and apps, so be prepared to set up your device again after the reset.

What is the operating system of the Doogee CS1?

The Doogee CS1 runs on Android 10.


Specifications

Network

TechnologyNo cellular connectivity
2G bandsN/A
3G bandsN/A
4G bandsN/A
GPRSNo
EDGENo

Launch

Announced2021, February
StatusAvailable. Released 2021, February

Body

Dimensions41.5 x 35.9 x 8.9 mm (1.63 x 1.41 x 0.35 in)
Weight45 g (1.59 oz)
BuildPlastic frame, plastic back
SIMNo
50m water resistant (IP68) Metal bezel

Display

TypeIPS LCD
Size1.4 inches
Resolution240 x 240 pixels (~242 ppi density)

Platform

OSProprietary
ChipsetnRF52832

Memory

Card slotNo

Camera

No

Sound

LoudspeakerNo
3.5mm jackNo

Comms

WLANNo
Bluetooth4.0, A2DP, LE
PositioningNo
NFCNo
RadioNo
USBNo

Features

SensorsAccelerometer, heart rate

Battery

TypeLi-Ion 200 mAh, non-removable

Misc

ColorsGraphite Black, Space Gray
PriceAbout 30 EUR

Other Doogee phones like the CS1