How to reset or factory restore Cubot Pocket 3 device?
There are two ways to reset or factory restore a Cubot Pocket 3 device: using the recovery mode and using the PC.
Using Recovery Mode:
1. Turn off your device.
2. Press and hold the power button and the volume up button at the same time.
3. Release the power button, but continue to hold the volume up button.
4. Wait for the recovery menu to appear.
5. Select "Wipe data/factory reset" and then select "Yes - delete all user data on the device".
6. Wait for the device to reset and then select "Reboot system".
7. Your device should now restart and be reset to its original factory settings.
Using PC:
1. Connect your device to your PC using a USB cable.
2. Download and install the Cubot Pocket 3 driver on your PC.
3. Open the device manager on your PC and find Cubot Pocket 3 in the list of devices.
4. Right click on Cubot Pocket 3 and select "Update driver".
5. In the update driver window, select "Browse my computer" and choose the cubot\_pocket3.inf file from the USB drive.
6. Click on "Next" and then "Install".
7. Once the driver is installed, open a Command Prompt as an administrator.
8. Type "adb devices" and then connect to your device by typing "adb connect ".
9. Type "adb reboot recovery" to enter recovery mode.
10. In recovery mode, select "Wipe data/factory reset" and then select "Yes - delete all user data on the device".
11. Wait for the device to reset and then select "Reboot system".
12. Your device should now restart and be reset to its original factory settings.
Note: If you are unable to recover your device using either method, it is recommended to contact Cubot customer support for assistance.
