How to reset or factory restore Cubot N1 device?
Resetting or factory restoring a Cubot N1 device can be done using different methods, depending on the preferred approach. Below are the most common and recommended ways to reset or factory restore a Cubot N1 device:
1. Using the Reboot menu: This method is suitable for devices that are still in working condition but you want to reset all the settings to their default state. Here are the steps:
- Turn off your device.
- Press and hold the Volume Up button and the Power button together for about 10 seconds until the Reboot menu appears.
- Select "Factory Data Reset".
- Select "Yes -- Delete All User Data".
- Wait for the device to reset.
2. Using recovery mode: This method is suitable for devices that are experiencing problems and cannot be restarted. Here are the steps:
- Download the Cubot N1 Stock ROM from the official website.
- Enable USB debugging on your device.
- Connect your device to a computer using a USB cable.
- Open the fastboot command prompt on your computer.
- Enter the following command to reboot your device into recovery mode: "adb reboot recovery"
- Once the device boots up into recovery mode, select "Factory Data Reset".
- Select "Yes -- Delete All User Data".
- Wait for the device to reset.
3. Using soft recovery: This method is suitable for devices that you want to reset without erasing all the data. Here are the steps:
- Download and install the Cubot N1 Custom Recovery from the official website.
- Reboot your device into recovery mode using the Volume Up button and Power button.
- Once the device boots up into recovery mode, select "Factory Data Reset".
- Select "Yes -- Delete All User Data".
- Wait for the device to reset.
It is recommended to use a backup before resetting or factory restoring your device, as all the data will be deleted. Additionally, it is important to follow the steps carefully and avoid interrupting the process, as it could lead to bricking your device.
