What are the features of Coolpad CP12?
Coolpad CP12 features a 5.5-inch HD display, a quad-core processor, 2GB of RAM, 16GB of internal storage, a 13MP rear camera, and a 5MP front-facing camera.
What is the battery capacity of Coolpad CP12?
The Coolpad CP12 is powered by a 3000mAh battery.
How to reset or factory restore Coolpad CP12 device?
To reset or factory restore a Coolpad CP12 device, you can follow these steps:
Method 1: Using the Volume and Power Buttons
1. Turn off your Coolpad CP12 device.
2. Press and hold the Power button and Volume up button simultaneously for at least 10 seconds.
3. Release both buttons when you see the Coolpad logo on the screen.
4. The device will now enter recovery mode.
5. In the recovery mode, select the "Factory Data Reset" or "Clear Data/Factory Reset" option using the Volume buttons.
6. You will be prompted to confirm the data reset. Select "Yes, delete all user data" to proceed with the reset.
7. Wait for the device to complete the reset process. This may take several minutes.
8. Once the process is complete, the device will automatically reboot and enter the home screen.
Method 2: Using the Coolpad Custom Recovery
1. Download the Coolpad Custom Recovery from a reliable website.
2. Transfer the downloaded file to your device using a USB cable.
3. Reboot your device and enter recovery mode by pressing and holding the Power button and Volume up button simultaneously until you see the device logo.
4. Use the Volume buttons to navigate through the recovery menu and select the "Install from SD card" option.
5. Browse to the location where you stored the custom recovery file and select it.
6. The device will now install the custom recovery.
7. Once the installation is complete, you can create a full system backup or select the "Wipe data/factory reset" option to perform a system reset.
8. After the reset, reboot the device and enter the recovery mode once again.
9. Select "Install from SD card" again and browse to the location of the custom recovery file.
10. Install the custom recovery again and reboot the device.
11. The device will now reboot and enter the home screen.
Note: It's important to note that using a custom recovery may void your device's warranty and can also cause damage to your device if not done correctly. It's always recommended to use the official methods to reset your device.
What is the operating system of Coolpad CP12?
The Coolpad CP12 runs on Android 6.0 Marshmallow.
