How to reset or factory restore Celkon Q5K Power device?
Here are the most common and recommended ways to reset or factory restore a Celkon Q5K Power device:
1. Using hardware buttons:
a. Turn off the device.
b. Press and hold the power button for 10-15 seconds until the Celkon logo appears.
c. Release the power button and wait for the recovery menu to appear.
d. Once in recovery mode, select "Factory Data Reset" or "Wipe Data/Factory Reset" using the volume buttons and power button.
e. Confirm the reset by selecting "Yes" using the power button.
f. The device will now start to reset and erase all data.
2. Using a computer and USB cable:
a. Connect the device to a computer using a USB cable.
b. Open the "Fastboot" tool on your computer (usually located in the "Android SDK" folder).
c. Make sure that your computer has the latest version of the Celkon drivers installed.
d. Type the following command into the Fastboot tool and press enter: "fastboot erase bootloader"
e. A confirmation message should appear. Allow a few minutes for the device to reset.
f. Once the device is reset, you can load the firmware using the fastboot tool by typing "fastboot flash bootloader recovery.img" where "recovery.img" is the name of the recovery image file.
3. Using a recovery image:
a. You will need to obtain a recovery image file for your Celkon Q5K Power device. You can find this on the Celkon website or by searching online.
b. Connect your device to a computer using a USB cable.
c. Copy the recovery image file to your computer.
d. Open a command prompt or terminal window and navigate to the folder where the recovery image file is located.
e. Run the following command and press enter: "fastboot flash recovery recovery.img"
f. Once the device is flashed, reboot it and follow the process outlined in step 1 using the hardware buttons.
It's important to note that these methods will erase all data on your device, so make sure to back up any important information before proceeding with a reset or factory restore. Additionally, it's recommended to only use these methods if you are unable to remove the device from a locked system or if it is experiencing severe issues.
