How to reset or factory restore Celkon Q470 device?
To reset or factory restore a Celkon Q470 device, there are several methods that you can use, depending on your preferences and the situation in which you want to perform the reset. Here are the most common and recommended ways:
Method 1: Using the Volume Up and Power Buttons
1. Turn off your Celkon Q470 device.
2. Press and hold the Volume Up button and the Power button simultaneously for at least 10 seconds.
3. Release both buttons.
4. The device should enter the recovery mode.
5. Using the Volume buttons, highlight the "Factory Data Reset" option and press the Power button to select it.
6. When prompted, confirm the factory reset by selecting "Yes" using the Volume buttons.
7. Wait for the device to reset itself. This may take several minutes.
8. Once the reset is complete, press and hold the Volume Up button and the Power button together for 10 seconds again to reboot the device.
Method 2: Using the USB Debugging Bridge and a Computer
1. Connect your Celkon Q470 device to your computer using a USB data cable.
2. Ensure that USB debugging mode is enabled on your device by going to Settings > Developer Options > USB debugging.
3. Install the Celkon Q470 USB driver on your computer.
4. Open a command prompt window on your computer.
5. Navigate to the device's storage folder using the "adb devices" command and locate the serial number of your device.
6. Enter the following command to reboot your device into recovery mode: "adb reboot recovery"
7. Once the device enters recovery mode, you can proceed with the factory reset as described in Method 1.
Method 3: Using Custom Recovery and ROM Manager
1. Download and install the recovery manager and custom recovery image on your device from a trusted source.
2. Reboot your device into recovery mode by pressing and holding the Volume Up button and the Power button simultaneously.
3. Once the recovery manager is open, select "Backup and Restore" and then select "Factory Data Reset."
4. Confirm the factory reset and wait for the device to reset itself.
5. Once the reset is complete, reboot the device using the Volume Up and Power buttons as described in Method 1.
It's important to note that resetting your Celkon Q470 device to its factory settings will erase all data, including personal items, apps, and settings. Make sure to back up any important information before performing a reset.
