How to reset or factory restore Celkon Q44 device?
When it comes to resetting or factory restoring your Celkon Q44 device, there are various methods that you can try. These methods will erase all user data and settings on your device, so be sure to back up any important information before proceeding. In this answer, we will discuss the most common and recommended ways to reset or factory restore a Celkon Q44 device.
Method 1: Using the Device's Resetting Option
1. Turn off your Celkon Q44 device.
2. Press and hold the Power button until the device enters recovery mode. This can take a few seconds, so keep holding down the button.
3. Once the device is in recovery mode, use the Volume Down button to highlight the "Wipe data/factory reset" option and the Power button to select it.
4. The device will erase all data and settings, so be sure to select "Yes - delete all user data" to proceed.
5. Once the data is erased, the device will reboot and you will be prompted to set up the device as new.
Method 2: Using a Computer with a USB Cable
1. Connect your Celkon Q44 device to your computer using a USB cable.
2. Install the appropriate drivers for your device on your computer.
3. Select the "Backup and Restore" option from your device's settings menu.
4. Choose "Factory data reset" from the backup and restore menu.
5. Enter the PIN or password for your device's backup data.
6. Wait for the device to restore the firmware and erase all data and settings.
7. Disconnect the device from the computer and turn it off.
8. Hold down the Power button until the device enters recovery mode.
9. Once in recovery mode, select "Yes - delete all user data" and reboot the device.
Method 3: Using the Hardware Reset Function
1. Hold down the Power button and the Home button simultaneously for 20 seconds or until the device switches off.
2. Release the Power button and press and hold the Home button.
3. Wait for the device to boot into recovery mode.
4. select "Yes - delete all user data" and reboot the device.
Method 4: Using Recovery Software on a Computer
1. Connect your Celkon Q44 device to your computer using a USB cable.
2. Install a recovery software on your computer such as RecoverLead, MobileSaver or EaseUS MobiSaver.
3. Select the Celkon Q44 device from the list of available devices.
4. Choose "Backup" and enter the appropriate backup password or create a new one.
5. Select "Factory Data Reset" and follow the on-screen instructions to complete the restore process.
6. Reboot your device and select "Yes - delete all user data" to complete the reset.
It is worth noting that resetting your device can be risky, as you will lose all data and settings. It is always recommended to back up important information before restoring your device, and to restore from a trusted backup source rather than factory resetting.
