How to reset or factory restore Celkon Millennia Everest device?
When a Celkon Millennia Everest device is not working properly - including being slow, unresponsive, or otherwise experiencing issues - it may be necessary to reset or factory restore the device.
There are multiple ways to reset or factory restore a Celkon Millennia Everest device, but the most common and recommended methods are as follows:
Method 1: Using a PC and a USB cable
To reset a Celkon Millennia Everest device using a PC and a USB cable, follow these steps:
1. Connect the Celkon Millennia Everest smartphone to a PC using a USB cable.
2. Go to the device manager on your PC, and find the Celkon Millennia Everest smartphone in the list of connected devices.
3. Right-click on the Celkon Millennia Everest smartphone and select "Properties".
4. Go to the "Backup" tab, and click "Backup".
5. Wait for the backup to complete.
6. Once the backup is done, click "Restore".
7. Follow the prompts to restore the device to its factory settings.
Method 2: Using a Smartphone Recovery software
To reset a Celkon Millennia Everest device using Smartphone Recovery software, follow these steps:
1. Download and install the Smartphone Recovery software on your PC.
2. Connect the Celkon Millennia Everest smartphone to a PC using a USB cable.
3. Run the Recovery software and click "Backup".
4. Follow the prompts to initiate a backup of your device.
5. Once the backup is complete, select "Restore".
6. Follow the prompts to restore the device to its factory settings.
Method 3: Using the Recovery Mode
When you're unable to restore your Celkon Millennia Everest device using PC or Smartphone Recovery software, you can attempt to reset it using the Recovery Mode.
To reset a Celkon Millennia Everest device using the Recovery Mode, follow these steps:
1. Power off the Celkon Millennia Everest device.
2. Press and hold the Power and Volume Down buttons together for a few seconds, then release them.
3. The Celkon Millennia Everest device will boot into the Recovery Mode.
4. In the Recovery Mode, select "Wipe Data/Factory Reset".
5. Follow the prompts to restore the device to its factory settings.
It is always recommended to make a backup of your device before trying to restore it. If you have any doubts or questions about the process, it's also recommended to consult the official documentation or contact the manufacturer for assistance.
