How to reset or factory restore Celkon Campus One A354C device?
When a Celkon Campus One A354C device starts showing various problems or crashes, one of the options to restore it back to its previous condition is by resetting or factory restoring the device. Here are some of the most common and recommended ways to reset or factory restore the Celkon Campus One A354C device:
1. Using the recovery mode:
* Turn off your device.
* Press and hold the power button + the home button et the volume up button for about 15 seconds until the recovery screen appears.
* Use the volume buttons to highlight "Yes, Reset Settings" and press the power button to select it.
* Wait for the device to reset, the process may take a few minutes.
2. Using the PC:
* Connect your device to your computer using a USB cable.
* Download and install the latest version of the Celkon Campus One A354C Backup Assistant from the Celkon website.
* Run the application and click on "Backup" > "Backup all data accounted for".
* Click on "Yes, Reset Settings" > "Data Wipe Code" and enter "7853".
* Confirm that you want to erase all data by clicking on "Yes" or "OK".
* Wait for the device to restart and click "Accept Terms and Conditions" to complete the setup.
3. Using the Carrier settings:
* Go to the Settings menu and select "About device" > "Software Information" > "Build number" multiple times until the system notification appears.
* Tap on "OK" and wait for the device to check for the new software.
* Once the new software is found, select "OK" and wait for the device to restart.
It's important to note that using any of these methods will erase all media, apps and data from the device, so backup any essential data first. Also, before resetting the device, make sure you check the device's battery level, if possible, make sure the device's battery percentage is higher than 20%.
