How to reset or factory restore Celkon C7045 device?
There are several ways to reset or factory restore a Celkon C7045 device, depending on the specific circumstances. However, some of the most common and recommended methods are:
1. Resetting to normal settings: The first method is to reset the device to its normal settings. This will restore the device's settings to their previous state and can be done easily. This method is normally implemented using the phone's keys.
To reset to normal settings:
* Press and hold the power key (usually the home button) and the volume up key together until the "Reserve + Point" menu appears.
* Release the keys.
* Then, press and hold the power key only until the phone restarts.
* Wait for the phone to restart and then release the keys.
2. Resetting to recovery mode: If the above method didn't work, you can try resetting the device to recovery mode. This will allow you to flash new firmware onto the device.
To reset to recovery mode:
* Press and hold the power key (usually the home button) and the volume down key together until the "Reserve + Point" menu appears.
* Release the keys.
* Then, press and hold the power key only until the phone restarts.
3. Using a PC: You can also use a PC to reset the device's operating system. This using the Celkon C7045 Windows USB driver and a recovery image that is compatible with your device.
To reset the device using a PC:
* Connect the device to the PC using a micro USB cable.
* Install the Celkon C7045 USB driver on your PC.
* Download the recovery image that is compatible with your device.
* Open a command prompt on your PC.
* Type the following command to check the list of devices available for flashing:
`adb devices`
* You'll see a list of all devices connected to your PC. Find the Celkon C7045 device on the list and take note of its serial number.
* Next, navigate to the directory where you've saved the recovery image.
* Type the following command to reboot the device into recovery mode:
`adb reboot recovery`
* Once the device is in recovery mode, you can use the recovery menu to flash the new firmware onto the device.
Note: It is recommended to have a backup of all data on the device before attempting to reset or factory restore it.
