How to reset or factory restore Celkon C203 device?
To reset or factory restore a Celkon C203 device, you can use any of the following methods:
Method 1: Using recovery mode and SuperSU app
1. Turn off the device by pressing and holding the power button until the screen turns off completely.
2. Press and hold the power button and the recovery key at the same time until the recovery screen appears.
3. The recovery screen shows several options. Select "Backup and Restore" or press the home key to exit and try again.
4. When the "Backup and Restore" screen appears, select "Factory Data Reset" or "Wipe data/factory reset."
5. The device will now wipe all of your data and settings and return to its factory state.
Method 2: Using stock firmware or ROM
1. Download the latest stock firmware or ROM for your Celkon C203 device.
2. Connect the device to your computer using a USB cable and boot it into recovery mode.
3. When the recovery screen appears, select "Install from SD card."
4. Choose the stock firmware or ROM that you downloaded in step 1.
5. After the installation is complete, select "Reboot system" or "Wipe data/factory reset."
6. The device will now wipe all of your data and settings and return to its factory state.
Method 3: Using a third-party app
1. Download a third-party app like "SP Flash Tool" or "Easy Backup Tools" that allows you to flash the device's firmware.
2. Connect the device to your computer using a USB cable and boot it into recovery mode.
3. When the recovery screen appears, select "Flash", then "Download and Install" or "Install Flash File."
4. Choose the stock firmware or ROM for your device that you downloaded earlier.
5. The device will now wipe all of your data and settings and return to its factory state.
Note: Before resetting or factory restoring your device, make sure to backup all of your important data and settings to an external hard drive or cloud storage service.
