How to reset or factory restore Celkon C11 device?
When a Celkon C11 device becomes unresponsive or sluggish, there are several ways to reset or factory reset the device. Here are some of the most common and recommended methods:
1. Soft Reset:
To perform a soft reset on your Celkon C11 device, follow these steps:
a. Press and hold the power button for about 10 seconds.
b. Press and hold the home button at the same time.
c. Release the power button and wait for the device to restart.
2. Hard Reset:
A hard reset is a risky method that should only be attempted without any backup. Here's how to perform a hard reset on your Celkon C11 device:
a. Turn off the device by pressing and holding the power button until it turns off.
b. Press and hold the power button for about 10 seconds.
c. Press and hold the volume down button at the same time.
d. Press and hold the power button again until the device restarts.
3. Bootloader:
If you have a computer with USB capabilities, you can reset your Celkon C11 device to its factory settings using the bootloader. Here's how to do it:
a. Connect your device to a computer using a USB cable.
b. Download Celkon stock firmware for your device from the internet.
c. Run the firmware file and wait for the device to restart.
4. Recovery Mode:
If you have a bootloader password set, you can reset your Celkon C11 device through recovery mode. Here's how to do it:
a. Download and install a recovery image for your device.
b. Connect your device to a computer using a USB cable.
c. Run the recovery image and wait for the device to restart.
Remember, before performing any reset or factory reset, it is recommended that you back up your device's important data and settings.
