How to reset or factory restore Celkon C1 device?
To reset or factory restore a Celkon C1 device, there are several methods you can try:
Method 1: Using the buttons
1. Turn off your Celkon C1 device by pressing and holding the power button.
2. Press and hold the Volume Up button while the device is still turned off.
3. Release the Volume Up button and press and hold the Power button and the Volume Down button together.
4. Release the Volume Down button and press the Power button again to confirm the reset.
5. The device will boot into the recovery mode.
6. Once you are in the recovery mode, you should see a "Wipe data/factory reset" option. Select it and tap "Yes" or "OK" to confirm the reset.
7. Wait for the reset process to complete.
8. Once it's over, you device will restart and erase all data and settings to their factory default settings.
Method 2: Using recovery file and a computer
1. Download a recovery image for your Celkon C1 device from the internet.
2. Connect your Celkon C1 device to your computer using a USB cable.
3. Open a command prompt on your computer and navigate to the folder where the recovery image is stored.
4. Run the following command to check if the device is recognized by the computer: "adb devices".
5. Use the following command to reboot your Celkon C1 device into recovery mode: "adb reboot recovery".
6. Once your device boots into recovery mode, you should see the recovery menu.
7. Select "Install from SD card" or "Install from computer" and choose your recovery image file.
8. Wait for the reset process to complete.
9. Once it's over, your Celkon C1 device will be restored to its factory settings.
Note: Before attempting a reset or factory restore, make sure to backup all important data and settings from your device.
