Celkon A85

Home/ Celkon/ Phones/ A85

Table of Contents

Summary

Celkon A85 Price

At the time of it's release in 2012, October, the manufacturer's retail price for a new Celkon A85 was about 60 EUR.

The retail price of a new or used/second hand Celkon A85 varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of Celkon A85 across different regions, markets and countries.

Frequently Asked Questions(FAQs)

How to reset or factory restore Celkon A85 device?

There are a few different ways to reset or factory restore a Celkon A85 device, but the most common and recommended method is to use the Celkon A85's built-in recovery mode to flash the stock firmware onto your device. Here are the step-by-step instructions: 1. Check your device's battery level. It should have at least 50% charge left. 2. Connect your Celkon A85 to your computer using a USB cable. 3. Back up any important data from your device, as resetting or flashing firmware can erase everything. 4. Open a command prompt on your computer and navigate to the folder where the Celkon A85 USB driver is installed. 5. Type the following command and press enter: `fastboot devices` This will list all of the devices connected to your computer. Make sure that your Celkon A85 is listed here. 6. Type the following command and press enter: `fastboot reboot recovery` This will reboot your device into recovery mode. 7. When your Celkon A85 boots into recovery mode, you will see a list of options. Select "Flash firmware" by highlighting it and pressing the volume down button. 8. You will be presented with a list of firmware options. Select "latest firmware" to download and flash the latest version of the stock firmware onto your device. 9. Your device will reboot and the firmware installation will begin. This process may take a few minutes. 10. Once the installation is complete, your device will boot up into the operating system and all of your data will be restored to its previous state. It's important to note that resetting or flashing firmware can erase all of your data, so it's essential to make sure that you have a backup of everything before you start. Additionally, using any third-party recovery software or attempting to root your device can cause permanent damage and should be avoided.