Celkon A10

Home/ Celkon/ Phones/ A10

Table of Contents

Summary

Celkon A10 Price

At the time of it's release in 2013, August, the manufacturer's retail price for a new Celkon A10 was about 50 EUR.

The retail price of a new or used/second hand Celkon A10 varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of Celkon A10 across different regions, markets and countries.

Frequently Asked Questions(FAQs)

What is the battery capacity of Celkon A10?

The battery capacity of Celkon A10 is 2000 mAh

How to reset or factory restore Celkon A10 device?

Resetting or factory restoring a Celkon A10 device can help to restore the device to its original state, in case the previously installed software caused any issues or the device is experiencing some lag or other technicalities. Here are the most common ways to reset or factory restore a Celkon A10 device: Method 1: Using the Hardware Keys 1. Turn off the Celkon A10 device. 2. Press and hold the Volume Up key until the device starts in recovery mode. 3. Release the Volume Up key when the Celkon logo appears on screen. 4. In the recovery mode settings, select the "Factory Data Reset" or "Wipe Data/Factory Reset" option using the Volume keys. 5. Confirm the factory reset by selecting "Yes - Delete all User Data" or "Yes - Erase All Data". 6. Wait for the device to reset to its factory settings. This process may take several minutes. 7. Turn off the device and then turn it back on to complete the reset process. Method 2: Using the Android Settings 1. In the Android settings, tap on "Backup & Reset". 2. In the "Reset phone to factory settings" section, select "Factory Data Reset". 3. The device will prompt you to enter your password or PIN to confirm the factory reset. 4. Once the factory reset is complete, the device will start in its factory reset mode. 5. Press and hold the Volume Up key until the device enters recovery mode. 6. In the recovery mode settings, select "Reset System" or "Yes - Delete all User Data" to confirm the factory reset. 7. Wait for the device to reset to its factory settings. This process may take several minutes. Method 3: Using a Computer 1. Connect your Celkon A10 device to a computer using a USB cable. 2. Download and install the Celkon drivers for your PC. 3. Enter the Celkon device in "Fast Boot" mode by pressing and holding the Volume Down button and Power button. 4. On your computer, enter the Celkon device's address in Device Manager and select "FlashbootImages". 5. Copy the Celkon recovery image file to your computer. 6. Click on "Update Firmware" in the Celkon A10 PC settings and select "Flash Android Firmware From PC". 7. Browse to your computer folder with the recovery image file and click on it. 8. The device will restart and enter the recovery mode. 9. In the recovery mode settings, select "Yes - Erase All Data" to confirm the factory reset. 10. Wait for the device to reset to its factory settings. This process may take several minutes. It is important to note that resetting or factory restoring your device should be done carefully and only as a last resort to avoid losing important data or damaging the device. It is recommended to back up important files and data before resetting or factory restoring your Celkon A10 device.