How to reset or factory restore Celkon A 107+ device?
The most common and recommended ways to reset or factory restore a Celkon A 107+ device are as follows:
Method 1: Using the Volume and Home keys
1. Turn off your Celkon A 107+ device completely.
2. Once the device is turned off, press and hold the Volume Down and Home keys together.
3. You should see an option named "Reset to Factory Settings" or "Flash phone".
4. Release the keys and wait for your device to start.
5. When the Celkon logo appears, once again press and hold the Volume Down and Home keys together.
6. Your device will start the recovery mode or bootloader.
Method 2: Using a Display Unlocker
1. First, download and install a display unlocker program on your computer.
2. Connect your Celkon A 107+ device to the computer using a USB cable.
3. Open the display unlocker software and select "A107".
4. Confirm the device's information and click "Unlock" or "Flash".
5. Your device will enter the recovery mode or bootloader.
Method 3: Using the ADB Commands
1. Download and install the ADB program on your computer.
2. Connect your Celkon A 107+ device to the computer using a USB cable.
3. Enable USB debugging mode on your Celkon A 107+ device.
4. Open a command prompt and navigate to the folder where ADB is installed.
5. Type the command "adb reboot recovery" and press Enter.
6. Your device will enter the recovery mode or bootloader.
Method 4: Physical Reset (3 Buttons)
1. Turn off your Celkon A 107+ device completely.
2. Open the back panel of your device and press the Power and Volume Down buttons simultaneously for about 10 seconds.
3. Press the Power button again and continue holding down for about 10 seconds.
4. Your device will enter the recovery mode or bootloader.
Note: Before resetting, it's important to backup important data and settings to avoid losing your information.
