How to reset or factory restore BLU Tattoo device?
The most common and recommended ways to reset or factory restore a BLU Tattoo device are as follows:
1. Use the TattaTech application: This is the official BLU app and is available for both Android and iOS users. Follow these steps to reset your device:
* Download and install the TattaTech application on your smartphone.
* Connect your Tattoo device to your smartphone via Bluetooth.
* Open the TattaTech application and tap on the "Settings" icon.
* Scroll down until you find the "Reset Device" option and tap on it.
* A pop-up prompt will appear asking you to confirm the reset process. tap on "Yes".
* The device will restart, and once it restarts, a coupling pair on the screen will appear.
* Tap on the coupling pair to proceed with pairing the device and start using it again.
2. Use a computer or laptop: This method is especially useful if your BLU Tattoo device is not pairing with your smartphone or if you don't have a TattaTech application on your smartphone. Follow these steps to reset your device:
* Connect your Tattoo device to your computer or laptop using a USB cable.
* Open the Bluetooth settings on your computer or laptop.
* Enable Bluetooth on your device, a coupling pair will appear on the screen.
* Scan your laptop/computer for new devices, select the MODA BLU Tattoo and tap on 'Connect'.
* Once the device is connected, right-click on the device icon and select 'Properties'.
* Click on the 'General' tab and uncheck the option 'Allow this device to appear as multiple interfaces'.
* Click on 'Settings' and enter the default PIN code for the device, usually 1234.
* Click on 'Apply & Store Settings' and then 'Apply'.
* If the device asks for a firmware upgrade, select "No" and click 'Apply'.
3. Use an AC adapter with a reset button: This method is available for devices that have an AC adapter with a reset button. Follow these steps to reset your device:
* Unplug the device from the AC adapter.
* Press and hold the "Home" button on your device for 5 seconds.
* While holding down the "Home" button, plug the device into the AC adapter and press the "Home" button again.
* The device will enter the recovery mode, it may take a few minutes.
* Once the device enters the recovery mode, select "Yes" – I'm not one of these devices nicknamed Fux (and confirm).
* The device will then prompt you to reset to factory settings, select "Yes".
4. Contact BLU customer support: If the above methods do not work and you cannot reset your device, contact BLU customer support for assistance. They may be able to guide you through the reset process or provide troubleshooting steps to resolve any issues with your device.
It's important to note that resetting your device to factory settings will erase all data and settings on the device. It is recommended to backup your data before resetting the device.
