How to reset or factory restore BLU Studio Pro device?
There are several ways to reset or factory restore a BLU Studio Pro device, depending on the specific situation and personal preference. Here are the most common and recommended methods:
1. Using the recovery menu:
- Turn off your device
- Press and hold the power button and the volume down button simultaneously until the recovery menu appears
- Select "Wipe data/factory data" using the volume buttons and press the power button to confirm
- The device will erase all data and settings, returning it to its factory state
2. Using a computer:
- Install the BLU Studio Pro USB driver on a computer
- Connect your device to the computer using a USB cable
- Run the "FLASH" tool from the "Tools" tab on the toolbar on the computer
- Select "Ready to flash" and "Select Firmware" to select the firmware file for your device
- Click "Start" to begin the flashing process, which may take several minutes
- Once the flashing process is complete, the device will reboot and all data will be erased
3. Using a timer function:
- Go to settings
- Backup everything you need
- Go to Settings > About Phone > Build Number and tap it 7 times
- You will see a message "You are now a developer"
- Go to Settings > Developer Options
- Go to Settings > Developer Options > OEM revoking
- Choose "Yes"
- Go to Settings > Systems > Reset options
- Tap "Delete all user data/factory data"
- Choose "Now" and the device will start the reset process
It's important to note that these methods should be used with caution, as they will erase all data and settings on your device. You should make sure to back up any important information before performing a reset or factory restore. It is also important to note that these methods may not work on all devices or with certain firmware files. If you are unsure about the best method for your device, you can consult the official BLU Studio Pro user manual or contact customer support for assistance.
