How to reset or factory restore BLU R1 Plus device?
Resetting a BLU R1 Plus device to its factory settings can be done in several ways, depending on your preference and the scenario. Here are the most common and recommended methods:
Method 1: Using the Volume Down and Power buttons
1. Turn off the device by pressing and holding the Power button until the device shuts down.
2. Press and hold both the Volume Down and Power buttons at the same time until the device enters the Recovery Mode.
3. Select "Wipe data/factory reset" by using the Volume buttons to navigate through the options.
4. Scroll down to "Yes -- delete all user data" and press the Power button to select.
5. Wait for the device to reset to its factory settings.
Method 2: Using the Setting menu
1. Launch the Settings app by swiping up from the bottom edge of the screen.
2. Scroll down and select "About phone".
3. Scroll down to the bottom of the "About phone" section and select "Build number".
4. Repeat the process by selecting "Build number" several times until the Developer options menu appears.
5. Slightly tap and hold the Build number to trigger the menu.
6. Select "System update".
7. Select "Check for OTA updates".
8. If an update is available, select "Yes -- update device to latest version".
9. Follow the prompts to complete the update.
10. You will be prompted to "backup app data and settings". Select "Yes -- back up app data and settings to Google".
11. After the backup is complete, select "Factory data reset".
12. Scroll down to the bottom of the screen and select "Yes -- erase all user data and reset to factory settings".
13. Wait for the device to reset to its factory settings.
Method 3: Using the firmware recovery tool
To reset your BLU R1 Plus device using firmware recovery tool, you'll need a computer, a USB cable, and a BluStoolPlus flashing tool software. Here are the steps:
1. Connect the device to your computer using the USB cable.
2. Install the BluStoolPlus flashing tool software on your computer.
3. Make sure your device is in recovery mode by pressing and holding the Volume Up and Power buttons.
4. Run the BluStoolPlus flashing tool software on your computer.
5. Follow the prompts and select "Rooting" as the option.
6. Follow the prompts to complete the process.
7. Install the firmware recovery firmware by selecting the appropriate firmware file on your computer.
8. Follow the prompts in the flashing tool to complete the recovery process.
9. Once the recovery process is complete, select "Factory data reset".
10. Scroll down to the bottom of the screen and select "Yes -- erase all user data and reset to factory settings".
11. Wait for the device to reset to its factory settings.
