How to reset or factory restore BLU Life One X2 device?
BLU Life One X2 can be reset or factory restored when it becomes unresponsive, frozen or is experiencing software issues. Here are the most commonly recommended ways to do a reset or factory restore on a BLU Life One X2:
Method 1: Using recovery mode and password reset
1. Turn off your BLU Life One X2.
2. Press and hold both the power and volume buttons together.
3. Once you see the recovery menu, select "Wipe data/factory reset."
4. You will be prompted for a username/password. If you have set up a lock screen, use the lock screen password to proceed. If you don't have a lock screen password, press and hold the power button until you see the BLU logo, then press and hold the volume button until the recovery menu appears.
5. Then, select the "Yes -- delete all user data" option to proceed.
6. Wait for the device to reset to factory settings.
7. Once the process is complete, the device will reboot and you can set it up as a new device.
Note: Performing a password reset may wipe all data on the device, so make sure to back up your important data before attempting this restore.
Method 2: Using recovery mode and downloading a firmware update
1. Turn off your BLU Life One X2.
2. Press and hold both the power and volume buttons together.
3. Once you see the recovery menu, select "Install update."
4. Follow the on-screen instructions to download and install the latest firmware update available for your device.
5. Once the update is installed, the device will automatically reboot into normal mode without losing your data.
Note: Try this method first before attempting a full reset.
Method 3: Using a computer or PC to reset or factory restore
1. Connect your BLU Life One X2 to your computer using a USB cable.
2. Open a file explorer and navigate to your device.
3. Go to the "Software" folder and extract the firmware update file from the zip file to your device.
4. Draw the battery out of the device.
5. Press and hold the power button and volume button at the same time for 5-10 seconds until the recovery menu appears.
6. Scroll down to "Wipe data/factory reset" and select it.
7. Finally, select "Yes -- delete all user data" to proceed with the reset.
8. The device will start restoring automatically and reboot into normal mode when it is done.
Note: Make sure you have the latest drivers installed on your computer and have access to a reliable internet connection before attempting this restore method. Also, attempting a factory reset via computer may wipe all data on the device, so back up important data before attempting this restore.
