How to reset or factory restore BLU G9 Pro device?
The BLU G9 Pro device is an affordable, good-performing smartphone that runs on the Android operating system. If you encounter any software issues with your G9 Pro, resetting the device to its factory settings may help solve the problem. There are several ways to reset a BLU G9 Pro, but the most common and recommended methods are as follows:
1. Software Reset:
The software reset is a process that resets the device to the latest software version without erasing any user data. To perform a software reset on your BLU G9 Pro device, follow these steps:
* Turn off the device.
* Press and hold the Volume Up button and the Power button at the same time for 10 seconds until the phone enters recovery mode.
* Use the volume buttons to navigate to "Wipe data/factory reset" and press the Power button to confirm.
* Wait for the device to reset.
Please note that a software reset only works if the device is responsive and has a battery.
2. Bootloader Reset:
A bootloader reset is a process that resets the device to its factory settings and reverts it to the Android image stored on the bootloader. A bootloader reset is usually used to install custom ROMs or recoveries. To perform a bootloader reset on your BLU G9 Pro device, follow these steps:
* Visit the BLU official website and download the bootloader recovery image for your device.
* Connect the device to your computer using a USB cable.
* Open a command prompt or terminal window and navigate to the device directory.
* Flash the recovery image to the device using the following command: adb flash recovery recovery.img
* Reboot the device into recovery mode.
* Wipe data/factory reset from recovery mode.
3. Hard Reset:
A hard reset is a process that involves erasing all user data and restoring the device to its factory settings. A hard reset should only be performed as a last resort, as it will completely wipe all data on the device, including critical system files.
Please note that a hard reset should only be done if the device is completely unresponsive, and no other solution is working.
To perform a hard reset on your BLU G9 Pro device, follow these steps:
* Turn off the device.
* Press and hold the Volume Up button and the Power button at the same time for 10 seconds until the phone enters recovery mode.
* Use the volume buttons to navigate to "Wipe data/factory reset" and press the Power button to confirm.
* Wait for the device to reset.
Once the device has been reset, you can restore your data from a backup or start fresh with a new account. It's important to note that a factory reset will erase all data on the device, including Call logs, SMS logs, Contacts, Web Browsing History, and other data.
