How to reset or factory restore BLU EZ2Go device?
BLU EZ2Go device can be reset or factory restored using the following methods:
Method 1: Hard Reset
Hard Reset is the most common and recommended method to reset a BLU EZ2Go device. It involves physically pressing buttons on the device to clear all the data stored in the phone's memory. Here are the steps:
1. Turn off your BLU EZ2Go device
2. Press and hold the "Power" and "Volume-Up" buttons simultaneously.
3. Release the "Volume-Up" button after 5 seconds and continue holding the "Power" button.
4. Wait for the device to enter bootloader mode. You can enter bootloader mode by pressing and holding the "Power" and "Volume-Down" buttons simultaneously.
5. Once in bootloader mode, use the Volume and Power buttons to navigate through the options and select "Memory Usage."
6. Select "Yes: Clear Storage" and press the Power button to confirm.
7. Wait for the phone to reset and reboot, which may take several minutes.
Method 2: Using the Settings Menu
You can also reset your BLU EZ2Go device by using the device's settings menu. Here are the steps:
1. Open the Settings menu on your BLU EZ2Go device.
2. Scroll down to the bottom of the settings menu and select "Backup & Reset."
3. Tap " Factory Data Reset" and enter your current password when prompted.
4. If you don't have a password, you can use the Master Reset method, where you press and hold the Volume-Down and Power buttons for a few seconds until the screen goes blank.
5. Then, press and hold the Volume-Down and Power buttons again until the Samsung logo appears on the screen.
6. Release the Volume-Down button and press and hold the Power button.
7. Enter your master reset password and press the Power button to confirm.
8. The device will reset and reboot.
It is important to note that a factory reset will erase all data on your device, including contacts, messages, apps, and other personal information. Therefore, make sure to back up all important data before resetting your device.
