BLU C6

Home/ BLU/ Phones/ C6

Table of Contents

Summary

BLU C6 Price

The retail price of a new or used/second hand BLU C6 varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of BLU C6 across different regions, markets and countries.

Frequently Asked Questions(FAQs)

What is the battery capacity of the BLU C6

The BLU C6 has a 3000 mAh battery capacity

What is the display size of the BLU C6

The BLU C6 has a 5.5 inch display

What are the color options for the BLU C6

The BLU C6 is available in Black and Gold

How to reset or factory restore BLU C6 device?

There are several common and recommended ways to reset or factory restore a BLU C6 device, depending on the specific situation. Here are the three most recommended methods: Method 1: Using Hardware Keys 1. Turn off the device by holding the Power button down for 10 seconds until the device shuts down. 2. Press and hold the Volume Up button and the Power button at the same time for 10-15 seconds until the device enters the Bootloader mode. 3. Release the Volume Up button but continue to hold the Power button. 4. Use the Volume keys to navigate the recovery menu and select "Wipe data/factory reset". 5. Confirm the reset by pressing the Power button or Volume Down key. 6. Wait for the device to reset and reboot. Method 2: Using Recovery Mode 1. Turn off the device by holding the Power button down for 10 seconds until the device shuts down. 2. Connect the device to a computer using a USB cable. 3. Open a command prompt or terminal window on the computer and navigate to the folder where the fastboot executable is located. 4. Type the following command to enter recovery mode: `fastboot reboot recovery`. 5. Once the device reboots into recovery mode, select "Wipe data/factory reset" from the menu. 6. Confirm the reset and wait for the device to reset and reboot. Method 3: Using Bootloader Mode 1. Turn off the device by holding the Power button down for 10 seconds until the device shuts down. 2. Press and hold the Volume Up button and the Power button at the same time for 10 seconds until the device enters the Bootloader mode. 3. Once the device is in bootloader mode, select "Wipe data/factory reset" from the menu. 4. Confirm the reset and wait for the device to reset and reboot. It's important to note that all of these methods will erase all data on the device, so it's a good idea to make a backup of any important data before attempting to reset the device. Additionally, it's recommended to only use the factory reset option if the device is not functioning properly or if you want to start with a clean slate.