How to reset or factory restore Blackview Tab 11 device?
Sure, here's a detailed explanation of the most common and recommended ways to reset or factory restore a Blackview Tab 11 device:
Method 1: Using the Physical Buttons
--------------------------------
To reset a Blackview Tab 11 device using the physical buttons, follow these steps:
1. Turn off your device by pressing and holding the power button until it turns off.
2. Press and hold the Volume Down button and the Power button together for at least 10 seconds until the device restarts in Bootloader mode.
3. Release both buttons, and then press and hold the Volume Down button again until you see the Bootloader menu.
4. Select "Factory Data Reset" and confirm.
5. Wait for the device to reset to its factory settings.
Method 2: Using the Recovery Mode
--------------------------------
1. Turn off your device by pressing and holding the power button until it turns off.
2. Connect your device to your computer using the USB cable.
3. Go to the Blackview website and download the latest version of the Android firmware for your device.
4. Extract the firmware files to the root of your computer.
5. Open a command prompt on your computer.
6. Navigate to the directory where the firmware files are located.
7. Enter the command "fastboot flash recovery /path/to/recovery/image.img" and press enter.
8. Once the firmware has been flashed, unplug your device from the computer and turn it back on.
9. Press and hold the Volume Down button and the Power button together for at least 10 seconds until the device restarts in Bootloader mode.
10. Release both buttons, and then press and hold the Volume Down button again until you see the Bootloader menu.
11. Select "Recovery mode" and confirm.
12. In Recovery mode, select "Wipe data/factory data reset" and confirm.
13. Wait for the device to reset to its factory settings.
Method 3: Using the Blackview Utility Tool
----------------------------------------
To reset a Blackview Tab 11 device using the Blackview Utility Tool, follow these steps:
1. Download and install the Blackview Utility Tool from the Blackview website.
2. Connect your device to your computer using the USB cable.
3. Open the Blackview Utility Tool.
4. Select "Reboot to Bootloader" from the "More Tools" menu.
5. When the device restarts in Bootloader mode, select "Fastboot commands" and paste in the following command: "fastboot flash recovery /path/to/recovery/image.img".
6. press enter to start the flashing process.
7. When the firmware has been flashed, unplug your device from the computer and turn it back on.
8. Press and hold the Volume Down button and the Power button together for at least 10 seconds until the device restarts in Bootloader mode.
9. Release both buttons, and then press and hold the Volume Down button again until you see the Bootloader menu.
10. Select "Recovery mode" and confirm.
11. In Recovery mode, select "Wipe data/factory data reset" and confirm.
12. Wait for the device to reset to its factory settings.
Note: It's highly recommended to take a backup of all important data on the device before attempting a factory reset.
