How to reset or factory restore Blackview Oscal S80 device?
The Blackview Oscal S80 is an Android smartphone that can be reset to its original factory settings to troubleshoot various problems or return the device to its original state. Here are the recommended ways to reset or factory restore a Blackview Oscal S80 device:
1. Using a Physical Reset Button:
The most common method to reset a Blackview Oscal S80 device is using the physical reset button. Follow these steps:
Step 1: Turn off the device.
Step 2: Press and hold the power button for 10-15 seconds until the Blackview logo appears.
Step 3: Release the power button and press the volume up button at the same time.
Step 4: Release the volume up button and press the power button again.
Step 5: Wait for the device to reboot and the recovery mode screen to appear.
Step 6: Once in recovery mode, select "Wipe data/factory data reset" with the volume buttons and press the power button to confirm.
Step 7: Wait for the device to reset and reboot.
2. Using an OTA Update:
It is recommended to perform a firmware update that resets the device to its original factory settings. Follow these steps:
Step 1: Open "Settings" and tap on "System" or "About phone."
Step 2: Scroll down and tap on "System update."
Step 3: Check to see if there is a new firmware update available for your device.
Step 4: If an update is available, tap on "Download and install."
Step 5: Wait for the update to download and install on your device.
Step 6: Once the update is complete, tap on "Reboot system now."
Step 7: The device will reboot to its original factory settings.
3. Using Stock Firmware:
If you cannot use the physical reset button or OTA update method, you can use the stock firmware to reset the device to its original factory settings. You will need a computer with USB debugging enabled, the Blackview Oscal S80 USB driver, and the stock firmware for your device. Follow these steps:
Step 1: Flash the stock firmware on the device using the "QPWN" tool.
Step 2: Connect the device to the computer using a USB cable.
Step 3: Open "QPWN" and select the stock firmware for your device from the "Firmware" tab.
Step 4: Open the "Plan" tab and select "Android."
Step 5: Select the "Bootloader" tab and select "Yes, flash."
Step 6: Select the "Collocation" tab and select "Yes, flash."
Step 7: Wait for the device to flash the stock firmware.
Step 8: Once the flashing process is complete, disconnect the device from the computer.
Step 9: Press and hold the power button and the volume button for 10-15 seconds until the Blackview logo appears.
Step 10: Release the power button and press the volume up button at the same time.
Step 11: Release the volume up button and press the power button again.
Step 12: Wait for the device to reboot and the recovery mode screen to appear.
Step 13: Once in recovery mode, select "Wipe data/factory data reset" with the volume buttons and press the power button to confirm.
Step 14: Wait for the device to reset and reboot.
Note: Before using any reset method, make sure to create a backup of your important data on the device or in the cloud. It's recommended to use professional software or an OEM tool provided by Blackview to reset the device to avoid any potential damage to the device.
