Blackview Oscal Pad 60

Home/ Blackview/ Phones/ Oscal Pad 60

Table of Contents

Summary

Blackview Oscal Pad 60 Price

At the time of it's release in 2023, July, the manufacturer's retail price for a new Blackview Oscal Pad 60 was about 100 EUR.

The retail price of a new or used/second hand Blackview Oscal Pad 60 varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of Blackview Oscal Pad 60 across different regions, markets and countries.

Frequently Asked Questions(FAQs)

What is the battery life of the Blackview Oscal Pad 60?

The Blackview Oscal Pad 60 has a battery life of up to 10 hours.

What type of processor does the Blackview Oscal Pad 60 have?

The Blackview Oscal Pad 60 has a MediaTek MT6797 processor.

How to reset or factory restore Blackview Oscal Pad 60 device?

If you need to reset or factory restore a Blackview Oscal Pad 60 device, you can follow these steps: Method 1: Using the Volume and Power Buttons 1. Turn off the device by pressing and holding the Power button for 10 seconds until the device goes to sleep. 2. Press and hold the Volume Up button and the Power button simultaneously until the device enters the recovery mode. 3. Use the Volume buttons to navigate, and the Power button to confirm your selection. 4. In the Recovery menu, select "Factory data reset" using the Volume buttons. 5. Temperature calibration will now begin, wait for this progress to complete. 6. Once the temperature calibration is complete, select "Yes -- delete all user data" using the Volume buttons. 7. Wait for the device to reset and reboot. Method 2: Using USB Data Cable 1. Connect the device to your computer using a USB data cable. 2. Go to the Blackview device manager launched on your computer. 3. Select the device from the list and click on the "RSDuggtool". 4. Open RSDuggtool and select "Release Address" to set it to the stock firmware's address (usually 05000000). 5. Look for the firmware file on your Blackview device, and save it to your computer. 6. Run RSDuggtool and select "Flash" to start flashing the firmware to your device. 7. Once the flashing process is complete, a notification will appear indicating that the firmware has been successfully flashed. 8. Wait for the device to reboot and it should be restored to its factory settings. Note: Before resetting or factory resetting the Blackview Oscal Pad 60, it's a good idea to backup any important data that you don't want to lose. Additionally, it's important to use caution when performing a reset or factory reset, as it can result in data loss and user information.