How to reset or factory restore Blackview A80 Plus device?
The Blackview A80 Plus is a powerful smartphone that can be reset or factory restored if you want to start over to fix software issues, improve performance, or sell the device to someone else. Here are the most common and recommended ways to reset or factory restore a Blackview A80 Plus device:
Method 1: Using the recovery menu
1. Turn off the Blackview A80 Plus device and press and hold the power button, volume up button, and home button at the same time.
2. Wait for the recovery menu to appear on your screen, which should take a few seconds.
3. Once you see the recovery menu, use the volume keys to navigate and the power key to select an option.
4. Select the "Wipe data/factory reset" option and use the power key to confirm your choice.
5. Wait for the device to restart, which may take several minutes.
Method 2: Using a computer and USB cable
1. Connect your Blackview A80 Plus device to your computer using a USB cable.
2. Download and install the Blackview USB driver on your computer from the Blackview website.
3. Back up any important data from your device using your computer or an external hard drive before proceeding.
4. Open a command prompt on your computer and navigate to the folder where the Blackview Smartphone Manager software is installed.
5. Run the Blackview Smartphone Manager executable and select your Blackview A80 Plus device from the list of available devices.
6. Check the box next to "reset device to factory settings."
7. Click the "Reset" button to start the factory reset process.
8. Wait for the device to restart, which may take several minutes.
Note that this method requires a computer, a USB cable, and the Blackview Smartphone Manager software, which may not be available for all operating systems. Additionally, this method may erase all data from your device, so be sure to back up any important data before proceeding.
Method 3: Using a hardware reset button
Some Blackview smartphones, including the A80 Plus, have a hardware reset button that you can use to restart the device to its factory settings. To locate and use the hardware reset button on your Blackview A80 Plus device:
1. Turn off the Blackview A80 Plus device.
2. Press and hold the power button, volume down button, and home button at the same time, and press the hardware reset button (usually located on the back of the device) while holding the other buttons.
3. Wait for the device to restart, which may take several minutes.
Note that using the hardware reset button can erase all data from your device, so be sure to back up any important data before proceeding. Additionally, using the hardware reset button may brick your device, so use it with caution and at your own risk.
