How to reset or factory restore Bird S798 device?
The Bird S798 is a dual-frequency in-vehicle communication device designed for use in transportation fleets. It can be reset or factory restored when it becomes damaged or malfunctioning. Here are the most common and recommended ways to reset or factory restore a Bird S798 device:
1. Soft Reset:
This is the most common and easiest way to reset a Bird S798 device. It involves performing a soft reset from the device settings, which clears the device's RAM and resets minor system settings. To perform a soft reset on a Bird S798 device, follow these steps:
a. Press and hold the power button and the 1 key simultaneously for 10 seconds.
b. Release the power button and the 1 key.
c. Press the power button again to hearing sound "Ready to use". The device will enter normal operation mode.
2. Hard Reset:
The hard reset process erases all data and settings on the Bird S798 device, including the operating system. This process should be used only when statistically and methodically managed. To perform a hard reset on a Bird S798 device, follow these steps:
a. Press and hold the power button and the 1 key simultaneously for 10 seconds.
b. Release the power button and the 1 key.
c. Press and hold the power button and the 3 key simultaneously for 10 seconds.
d. Release the power button and the 3 key
e. Press and hold the 1 key and the power key simultaneously for 5 seconds.
f. Release both the power key and the 1 key.
g. The device will boot up to the factory settings menu.
3. Technical Support:
If a soft reset or hard reset fails, it's recommended to contact Bird's technical support. Bird's technical support team can guide you through the process of resetting the device and may need to provide additional assistance, depending on the issue you're experiencing.
Keep in mind that a hard reset will erase all data and settings on the Bird S798 device, so it's important to perform a backup of any important data before performing a hard reset.
