How to reset or factory restore Bird S590 device?
Sure, here are the most common and recommended ways to reset or factory restore a Bird S590 device:
1. Using the factory reset button: The factory reset button can be found on the back of the device. To access it, turn off the device and press and hold the factory reset button for a few seconds until the LED light turns red. Then release the button and wait for the device to restart. After the device restarts, press and hold the volume up button, then press and hold the power button. Release both buttons when the Bird logo appears and press and hold the volume up button until the reset option is displayed. Select the reset option and follow the prompts to complete the reset process.
2. Using the Bird).tech software: If you have access to a computer, you can restore your device to its factory setting using the Bird).tech software. Here's how:
- Connect your device to your computer using a USB cable.
- Install the Bird).tech software on your computer.
- Run the software and connect your device to it.
- Select "Reboot Device" in the settings menu.
- Follow the prompts to complete the reset process.
3. Using a factory reset code: If you don't have access to the factory reset button or the Bird).tech software, you can still reset your device using a factory reset code. However, this method is less common and may not work in all cases. To get a factory reset code, you may need to contact Bird customer support. Once you have the code, follow these steps:
- Disconnect your device from any charger or computer.
- Press and hold the power button and the volume down button at the same time.
- Release the buttons when the Bird logo appears.
- Use the volume buttons to enter the code in one of the following ways:
- If the code is an alphanumeric sequence, input the letters first by pressing the "1" button, followed by the "2" button to enter the first letter, the "3" button to enter the second letter, and so on until you have entered the entire sequence.
- If the code is a numerical sequence, input the numbers one by one using the number buttons (4, 5, and 6 represent "1, 2, and 3," respectively).
- Once you have entered the code, press the "Zero" button to confirm it.
- Wait for the device to restart.
It's important to note that factory resetting your device will erase all data and settings, so make sure to backup your important information before doing so. Additionally, it's always a good idea to contact Bird customer support if you're unsure about which method to use or need help with any step of the process.
