How to reset or factory restore Bird S1130 device?
To reset or factory restore a Bird S1130 device, you can use the following methods:
Method 1: Using the Factory Reset Option in Bird S1130 Settings
1. Power off the device.
2. Hold and press the Volume Down button and the Power button until the device enters Bootloader mode.
3. Once in Bootloader mode, you shall see the Samsung logo.
4. Using the volume buttons, navigate to the "Home" icon and press the power button.
5. You will enter the "Wipe data/factory data" option.
6. Select "Yes--yes" using the volume buttons.
7. Wait for the device to reset to its Factory state.
Method 2: Using a Computer to Factory Restore Bird S1130 Device
1. Connect your Bird S1130 to your computer using a USB cable.
2. Open the Samsung Kies software on your computer and make sure that it is up-to-date.
3. Click on "Repair Option" in the Kies software.
4. Follow the on-screen instructions to download and install the latest firmware for your device.
5. Once the download and installation are complete, click on the "Factory Data Restore" option.
6. Confirm the factory data restore by clicking on "Yes" or "OK".
Method 3: Using a Physical Reset Button on Bird S1130 Device
This method is only recommended if you are unable to access the Bootloader mode or the recovery options on your device.
1. Power off the device.
2. Press and hold the Power button and the Volume Down button for around 30 seconds until the device restarts.
3. The Bird S1130 should now enter the recovery mode.
4. Once in recovery mode, you can select the "Wipe data/factory data" option and follow the on-screen instructions to reset your bird S1130 device to its factory state.
It is important to note that resetting or factory restoring your device will erase all data on the device, including saved pictures, contacts, and settings. Therefore, make sure to back up your important data to a separate storage device before performing a reset or factory restore.
