How to reset or factory restore Bird M32 device?
To reset or factory restore a Bird M32 device, you can use one of the following methods:
1. Using the Bird M32 reset button:
a. Power off the device by pressing and holding the power button for 15 seconds until the device completely shuts down.
b. Press and hold the reset button on the back of the device.
c. Wait for the reset sequence to complete. This can take up to 5 minutes.
d. Release the reset button and wait for the device to boot up. It should now be reset to its factory settings.
Note: Using this method will erase all data and settings on the device. Use this method only when you want to completely reset the device and start from scratch.
2. Using the Bird M32 recovery mode:
a. Power off the device by pressing and holding the power button for 15 seconds until the device completely shuts down.
b. Press and hold the power button and the home button at the same time until the recovery mode screen appears.
c. Use the volume buttons to select "wipe data/factory reset" and the power button to confirm your selection.
d. Wait for the reset sequence to complete. This can take up to 5 minutes.
e. Once the reset sequence is complete, select "Reboot system now" and wait for the device to boot up. It should now be reset to its factory settings.
Note: Using this method will also erase all data and settings on the device. Use this method only when you want to completely reset the device and start from scratch.
3. Using the Bird M32 recovery flash drive:
a. Make sure your computer has the Bird M32 recovery image installed. You can download the recovery image from the Bird M32 official website.
b. Connect the Bird M32 recovery flash drive to your computer.
c. Enter recovery mode on your Bird M32 device by pressing and holding the power button and the home button at the same time until the recovery mode screen appears.
d. Use the volume buttons to select "Reboot from external storage" from the recovery menu, and the power button to confirm your selection.
e. Select the Bird M32 recovery image from the recovery flash drive and wait for the reset sequence to complete. This can take up to 5 minutes.
f. Once the reset sequence is complete, select "Reboot system now" and wait for the device to boot up. It should now be reset to its factory settings.
Note: Using this method will also erase all data and settings on the device. It's the most recommended method to completely reset the device and start from scratch.
