How to reset or factory restore Bird M19 device?
The Bird M19 device is a portable communication device that allows you to stay connected while on the go. However, in certain situations, you may need to reset or factory restore your device, such as when you have encountered software issues or want to start fresh with a clean slate. In this article, we will explain the most common and recommended ways to reset or factory restore a Bird M19 device.
1. Using the device's built-in reset feature:
The most common way to reset a Bird M19 device is by using the device's built-in reset feature. This feature can usually be accessed by performing the following steps:
a. Turn off the device by pressing and holding the power button until it turns off.
b. Press and hold the Volume Down button and the Power button together until the device enters recovery mode.
c. Once in recovery mode, navigate to the "Wipe data/factory data reset" option and select it.
d. Confirm that you want to perform a factory reset and wait for the process to complete.
e. After the reset is complete, the device will reboot and guide you through the setup process.
It's important to note that factory resetting your device will erase all of your data and settings, so make sure to backup important data before performing a reset.
2. Using the Bird M19's web interface:
Another way to reset a Bird M19 device is by using the device's web interface. To access the web interface, you will need to connect your device to the internet and access the following web address: [device_ip_address]/reset-to-default. Here, "device_ip_address" refers to the private IP address of your device.
Once you arrive at the web interface, enter the login credentials for your device, if prompted. Then, select the "Reset to default settings" option and confirm that you want to proceed. The device will then reboot and guide you through the setup process.
It's important to note that this method requires a computer or other device with internet access. You will also need to know the username and password for your device in order to access the web interface.
3. Using the Bird M19's resource management application:
The Bird M19 device also has a resource management application that can be used to reset the device to its default settings. To access this application, follow these steps:
a. Open the resource management application on your device.
b. Tap on the "Factory reset" option.
c. Confirm that you want to perform a factory reset.
d. Wait for the reset to complete.
e. Once the reset is complete, reboot your device and follow the on-screen prompts to set up your device.
It's important to note that factory resetting your device using the resource management application will only work if the app is installed on your device. If the app is not installed, you will need to follow one of the other methods listed above.
In conclusion, there are several ways to reset a Bird M19 device to its default settings. The most common and recommended methods include using the device's built-in reset feature, using the device's web interface, and using the device's resource management application. Before performing a Reset, make sure you have backed up any important data and have internet access. Also, keep in mind that factory resetting your device will erase all of your data and settings, so make sure to backup important data before performing a reset.
