How to reset or factory restore Benefon TWIG Discovery device?
Benefon TWIG Discovery is a smartphone that runs on the Android operating system. If you encounter any issues with the device and want to reset it to its factory settings, there are several methods you can use. Here are the most common and recommended ways to reset or factory restore a Benefon TWIG Discovery device:
Method 1: Using the Volume and Power buttons
1. Turn off the device.
2. Press and hold the Volume Up button and the Power button at the same time.
3. Release the buttons when you see the Benefon logo.
4. Select "Factory Data Reset" using the Volume buttons and press the Power button to confirm.
5. Wait for the device to reset.
6. Once the reset is complete, press and hold the Power button until the device turns back on.
7. Follow the on-screen instructions to set up the device.
Method 2: Using OEM Bootloader
1. Connect the Benefon TWIG Discovery device to your computer using a USB cable.
2. Download the custom OEM bootloader from a trusted source.
3. Enable USB debugging on your device by going to Settings > Developer Options > USB Debugging.
4. Make sure that USB debugging is enabled on your computer.
5. Run the custom OEM bootloader on your computer.
6. Wait for the device to reboot into recovery mode.
7. Select "Factory Data Reset" and confirm.
8. Once the device has been reset, you can reinstall the custom OEM bootloader.
Method 3: Using Custom Recovery Mode
1. Install custom recovery mode on your Benefon TWIG Discovery device.
2. Boot into custom recovery mode.
3. Select "Factory Data Reset" and confirm.
4. Wait for the device to reset.
5. Once the device has been reset, reboot into custom recovery mode.
6. Install the stock firmware on your device.
Note that all these methods require advanced technical skills and should only be attempted if you are comfortable with electronics repair and hoping to avoid any data loss. It's also recommended to follow a step-by-step guide and to avoid making any mistakes that may result in damage to the device. In any case, it's recommended to try the first method first as it's the easiest one to perform.
