How to reset or factory restore Asus Zenpad 7.0 Z370CG device?
To reset or factory restore an Asus Zenpad 7.0 Z370CG device, there are two possible methods that you can use. However, it's important to note that both methods will erase all data and settings on the device, which means that you will need to set up your device from scratch after performing a reset or factory restore. Here are the most common and recommended methods:
Method 1: Using the Power button and Volume Down key
1. Turn off the device by pressing and holding the power button until the device shuts down completely.
2. Press and hold the volume down button while turning the device back on.
3. Release the volume down button when the device logo appears on the screen.
4. Press and hold the volume down button again until the recovery menu appears on the screen.
5. Use the volume down and power buttons to navigate through the menu and select "Wipe data/factory reset".
6. Confirm the reset by selecting "Yes" or pressing the volume down button until "Yes" is highlighted.
7. Wait for the device to start resetting. This process may take several minutes.
8. Once the reset is complete, press the power button repeatedly to reboot the device.
Method 2: Using a computer and the Asus ZenPad 7.0 recovery tool
1. Download the Asus ZenPad 7.0 recovery tool from the official Asus website.
2. Connect your device to your computer using a USB cable.
3. Run the recovery tool and follow the on-screen instructions to backup your data if necessary.
4. Select "Factory Reset" from the menu.
5. Confirm the reset by selecting "Yes" or pressing the volume down button until "Yes" is highlighted.
6. Wait for the device to start resetting. This process may take several minutes.
7. Once the reset is complete, the device will reboot automatically.
It's important to note that both methods should only be used as a last resort if all other methods have failed. Also, it's important to back up your data before performing a reset or factory restore, as there is no guarantee that your data will be recoverable after the process is completed.
