What are the main features of the Allview Viva C703?
The Allview Viva C703 is a budget smartphone with a 5-inch HD display, a 1.3GHz quad-core processor, 1GB of RAM, 8GB of storage, a 5MP rear camera, a 2MP front camera, and a 2,000mAh battery.
How to reset or factory restore a Allview Viva C703 device?
Please note that factory resetting a device should only be done as a last resort, as it will erase all data and settings on the device, including personal information such as passwords, contacts, messages, and photos. Therefore, it is recommended to back up important data before performing a factory reset.
Here are the most common and recommended ways to reset or factory restore an Allview Viva C703 device:
Method 1: Using the button combination
1. Turn off the device by pressing and holding the power button until the device shuts down completely.
2. Press and hold the Volume Up button and the Power button simultaneously until the KINGFISHT logo appears on the screen.
3. Release the buttons and wait for the device to boot up into recovery mode.
4. Once in recovery mode, select the "Wipe data/factory reset" option using the Volume buttons to highlight it, and then use the Power button to select.
5. Wait for the device to erase all data and settings, and then select "Reboot system now" to restart the device.
Method 2: Using the Allview Smart Manager app
1. Download and install the Allview Smart Manager app on a computer or tablet.
2. Connect the device to the computer using a USB cable.
3. Open the Allview Smart Manager app, and select the "Backup and Restore" option from the left-hand menu.
4. Select the "Backup now" option to create a backup of the device's data and settings.
5. To restore the device, select the "Restore now" option, and follow the prompts to select the backup file and restore the device's data and settings.
Method 3: Using recovery mode and a PC or tablet
1. Turn off the device by pressing and holding the power button until the device shuts down completely.
2. Press and hold the Volume Up button and the Power button simultaneously until the KINGFISHT logo appears on the screen.
3. Release the buttons and connect the device to a computer or tablet using a USB cable.
4. Open the device driver software for the device type on the computer or tablet.
5. Use the device driver software to access the KINGFISHT logo, and flash the device with the factory firmware using the recovery files provided by the manufacturer.
6. After the device has been restored, disconnect the device from the computer or tablet, and release the KINGFISHT logo.
7. Wait for the device to boot up into recovery mode.
8. Once in recovery mode, select "Wipe data/factory reset" and follow the on-screen instructions to erase all data and settings on the device.
9. Select "Reboot system now" to restart the device.
Please note that using recovery mode to restore the device's software can be risky and could potentially damage the device if done incorrectly. Therefore, it is recommended to use the factory reset option through recovery mode only as a last resort.
