Allview Viper i V1

Name: Allview Viper i V1
Brand: Allview
Price: 200 EUR

Home/ Allview/ Phones/ Viper i V1

Allview Viper i V1 image - Nikonet125.com — An image of the Allview Viper i V1.

Table of Contents

Summary

The Allview Viper i V1 is a discontinued mid-range Android smartphone with a 5-inch IPS LCD display, a quad-core processor, 1GB of RAM, 8GB of storage, and a 5MP rear camera. It runs on Android 4.4 KitKat and is powered by a 2000mAh battery.

Allview Viper i V1 Price

At the time of it's release in 2014, May, the manufacturer's retail price for a new Allview Viper i V1 was about 200 EUR. Click here to discover the current price of Allview Viper i V1 in 🇺🇸 US.

The retail price of a new or used/second hand Allview Viper i V1 varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of Allview Viper i V1 across different regions, markets and countries.

Frequently Asked Questions(FAQs)

What is the battery capacity of Allview Viper i V1?

The Allview Viper i V1 has a battery capacity of 2000 mAh

What is the processor of Allview Viper i V1?

The Allview Viper i V1 is powered by a 1.3GHz Quad-Core processor

How to reset or factory restore a Allview Viper i V1 device?

Sure, I'd be happy to help with that. To reset or factory restore an Allview Viper i V1 device, you can follow these steps: 1. Turn off the device by pressing and holding the power button until the device shuts down completely. 2. Press and hold the power button and the volume down button simultaneously for at least 10 seconds. 3. Release both buttons and wait for a few seconds. Then, press and hold the power button and the home button simultaneously. 4. Release both buttons when you see the Samsung logo on the screen. 5. Wait for the phone to boot into the recovery mode. You'll know you're in recovery mode when you see the text "Start" on the screen. 6. Once you're in recovery mode, use the volume buttons to navigate and the home button to select. 7. Select "Factory data reset". 8. Then, select "Yes: erase all user data/factory data". 9. Wait for the device to erase all the data and restart. It's important to note that a factory data reset will erase all your personal data, including photos, videos, texts, contacts, and apps. Make sure to back up your important data before using this method. Also, this process may vary depending on your device's specific version and firmware.

What is the display size of Allview Viper i V1?

The Allview Viper i V1 has a 5.0-inch display

Specifications

Network

Technology	GSM / HSPA
2G bands	GSM 900 / 1800 / 1900 - SIM 1 & SIM 2
3G bands	HSDPA 900 / 2100
Speed	HSPA

Launch

Announced	2014, May. Released 2014, May
Status	Discontinued

Body

Dimensions	134.5 x 68.8 x 11 mm (5.30 x 2.71 x 0.43 in)
Weight	143 g (5.04 oz)
SIM	Dual SIM (dual stand-by)

Display

Type	IPS LCD
Size	4.7 inches, 60.9 cm2 (~65.8% screen-to-body ratio)
Resolution	540 x 960 pixels, 16:9 ratio (~234 ppi density)
Protection	Scratch-resistant glass