Allview Viper E

Home/ Allview/ Phones/ Viper E

Table of Contents

Summary

Allview Viper E Price

The retail price of a new or used/second hand Allview Viper E varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of Allview Viper E across different regions, markets and countries.

Frequently Asked Questions(FAQs)

What is the battery capacity of Allview Viper E?

The battery capacity of Allview Viper E is 2000 mAh

What is the display size of Allview Viper E?

The display size of Allview Viper E is 4.5 inches

What is the processor of Allview Viper E?

The processor of Allview Viper E is MediaTek MT6737

How to reset or factory restore a Allview Viper E device?

When it comes to resetting an Allview Viper E device, there are different methods to choose from. Here are the most common and recommended ones: Method 1: Resetting through the Settings menu 1. Open the Settings app on your Allview Viper E device. 2. Tap on "System options." 3. Scroll down and tap on "Reset settings." 4. Tap on "Reset device now." 5. Enter the PIN or pattern to unlock your device when prompted. 6. Wait until the device restores factory settings. This process may take several minutes. 7. Once the device reboots, you will see the setup screen where you can set up your device from scratch. Method 2: Resetting through the recovery mode 1. Turn off your Allview Viper E device and wait until it shuts down completely. 2. Press and hold the Volume Down key, the Power key, and the Home key simultaneously until the device enters the Bootloader mode. 3. Connect your device to your computer using a USB cable and make sure that your computer recognizes the device as a removable drive. 4. Open a command prompt on your computer and type "fastboot reboot bootloader" to reboot your device into Bootloader mode. 5. Open a recovery image for your Allview Viper E device on your computer and connect it to your device using a USB cable. 6. Reboot your device into recovery mode by selecting "Update from computer" and allowing the device to download the update file. 7. Once the device reboots, you will see the setup screen where you can set up your device from scratch. Method 3: Resetting through a physical button 1. Locate the "Physical Reset" button on your Allview Viper E device. 2. Insert a paper clip into the tiny hole next to the button and press down firmly. 3. Press and hold the Volume Up and Power keys simultaneously for 10 seconds. 4. Press the Reset button and wait until the device reboots. 5. Once the device reboots, you will see the setup screen where you can set up your device from scratch. It is important to note that resetting your Allview Viper E device to factory settings will erase all data on the device, so make sure to backup your important files before proceeding.

Specifications

Network

Technology: GSM / HSPA
2G bands: GSM 900 / 1800 / 1900 - SIM 1 & SIM 2
3G bands: HSDPA 900 / 2100
Speed: HSPA 21.1/5.76 Mbps

Launch

Announced: 2014, September. Released 2014, September
Status: Discontinued

Body

Dimensions: 131 x 65 x 7.8 mm (5.16 x 2.56 x 0.31 in)
Weight: 122.5 g (4.34 oz)
SIM: Dual SIM (Micro-SIM, dual stand-by)

Display

Type: IPS LCD
Size: 4.5 inches, 55.8 cm2 (~65.5% screen-to-body ratio)
Resolution: 480 x 854 pixels, 16:9 ratio (~218 ppi density)
Protection: Asahi Dragontrail Glass